Superior WRE3036 36" Outdoor Wood Burning Fireplace — White Stacked or Herringbone Refractory
A 36" wood-burning fireplace built for the outdoors — and listed for inside the house too. The Superior WRE3036 is a UL 127 factory-built firebox: it frames into an outdoor enclosure or a wall with 3/4" of airspace, sits directly on the floor, and vents on IHP 8" double-wall snap-lock chimney — 7-1/2 feet of system height minimum outdoors. The interior is white refractory in your choice of stacked or herringbone pattern, and the grate, screens and ember protector ship with it. from $2,519.
Choose the WRE3036 if you want a real wood fire on a patio or in an outdoor room without building a masonry fireplace — it frames like a factory-built firebox, burns seasoned cordwood on a steel grate, and the white brick interior is a pattern you pick rather than a fixed look. It is also the series to pick when the same firebox may end up indoors: it is listed for residential installation as well.
It is not right if there is no route for at least 7-1/2 feet of vertical chimney above the firebox, or if you want a fire that starts at the turn of a knob with no wood to season and no ash to carry. For a chimney-free outdoor space, look at a vent-free outdoor firebox like Superior's VRE4500 series, or an outdoor gas fireplace, instead.
Specifications
Frame an opening 41-3/4" wide, 41-3/4" high and 21-7/8" deep, holding 3/4" of airspace at the back and sides — not required at the nailing flanges — with 40" to the ceiling and 12" from a perpendicular wall to the opening. The chimney runs 8" IHP snap-lock double-wall pipe: 7-1/2 feet of system height minimum outdoors with at least 4 feet of pipe sections, 14.5 feet residential, 50 feet maximum, capped with a listed round or chase-top termination. In front, a noncombustible hearth extension at least 16" deep and 8" past each side — 51" x 16" on this model — protects a combustible floor, with the provided ember protector under the front edge. Outdoors, the enclosure must allow drainage and fresh-air ventilation. Listed to UL 127 / CAN/ULC-S610.
How the WRE3036 compares to the WRE3042 and the Custom series
The two WRE3000 Pro sizes share the same white stacked or herringbone interiors and the same 8" chimney system; they differ in width and framing. This 36" starts at from $2,519, against the 42" at from $3,469. If you want a taller 30" opening with panels running to the front edge and a 12" chimney, the step up is the Paneled Custom series — the WRE4536 starts at from $5,509.
Features
- 36" wood-burning firebox rated for residential and outdoor installation
- White refractory interior in a stacked or herringbone brick pattern
- UL 127 factory-built fireplace that also accepts vented or vent-free gas log sets
- Vents on IHP 8" double-wall snap-lock chimney — 7-1/2 feet minimum outdoors, 14.5 feet residential
- Hidden screen pockets, easy-access damper, drywall stops and dual pre-wired "J" boxes
- Ships with the grate, mesh screens and ember protector
Answers to common questions
What’s included, what’s required, and what’s optional?
-
Included in the box: White refractory interior panel set — White Stacked or White Herringbone; Grate, mesh screen assembly and ember protector; Gas-line knockouts; UL 127 / CAN/ULC-S610 listed (PFS); IHP 20-year limited warranty.
-
Required to complete the installation, purchased separately: Venting - IHP 8DM double-wall snap-lock chimney with firestop spacers, flashing and a listed termination; 7-1/2 feet of system height minimum outdoors, 14.5 feet residential (8HT stainless and the cold-air kit in Canada); Floor Protection - a site-built noncombustible hearth extension at least 16" in front and 8" beyond each side of the opening (51" x 16" per the specifications diagram); Outdoor Enclosure - for an outdoor build, an enclosure with adequate drainage and fresh-air ventilation.
-
Optional: Bi-fold glass doors (BDO36, black), the drain pan (DP36 — recommended under the fireplace outdoors), the stainless hood (HS36 — required only if you run a vent-free gas log), outside air kits (AK4 / AK4F), and a gas line with a vented or vent-free gas log set — the fireplace burns wood fully without them.
What chimney does it need, and is it in the box?
No — the chimney is sold separately. It runs IHP 8" snap-lock double-wall wood-burning pipe (8DM; the stainless 8HT is required in Canada along with the cold-air kit): outdoors the system must reach at least 7-1/2 feet from the base of the fireplace to the flue outlet with a minimum of 4 feet of pipe sections, a residential run needs 14.5 feet, and 50 feet is the maximum, capped with a listed round or chase-top termination at least 3 feet above the roof. Send us your enclosure height and we will lay out the run with you.
Can it really go outside?
Yes — it is a residential and outdoor wood-burning fireplace, and outdoor installation is what this page sells it for. The enclosure you build around it must allow adequate drainage and fresh-air ventilation, and Superior recommends a sealed, corrosion-resistant drain pan (the DP36) under the fireplace inside the enclosure. The same firebox is also listed for installation inside the house, and in an aftermarket manufactured or mobile home — though never in a sleeping room.
Can I burn gas logs in it instead of wood?
Yes — the fireplace is approved for a vented gas log set (ANSI Z21.60 or Z21.84) with the damper removed or locked fully open and the doors fully open, or for a vent-free set listed to ANSI Z21.11.2 — and a vent-free set additionally requires the HS36 stainless hood. A 1/2" black iron gas line runs in through the knockouts. Never operate an unvented log set with the chimney removed.
What does it need for the floor?
The firebox itself sits at 0" on the floor — over carpet or tile it goes on a metal or wood panel its full width and depth. In front, build a noncombustible hearth extension at least 16" deep and 8" past each side of the opening — the specifications diagram draws it 51" x 16" — and set the provided ember protector between it and the fireplace.
How does the warranty work if something goes wrong?
Superior warrants the fireplace, and The Torch Guys handles it for you — we register the appliance and, if you ever need to claim, we deal with the manufacturer on your behalf rather than handing you a phone number. The body, firebox and ceramic glass carry a 20-year limited warranty. Keep your invoice and the model number; we hold the rest on file.
