Napoleon Woodland 18" Electric Log Set
An 18" wide electric log set that fills an existing fireplace opening at least 18" wide, 14" high and 14" deep, or sits in a mantel. The Napoleon Woodland NEFI18H has four hand-painted resin logs on a grate with charcoal embers, lit by LEDs with a moving flame effect, and a heater of up to 5,000 BTU/hr with a blower and thermostat — or run the flame with the heat off. It plugs into a dedicated 120 V outlet, with no vent and no gas line. from $629.
Choose the 18" if you have a small masonry fireplace you no longer burn wood in and want a fire in it again without a chimney sweep or a gas line, or want a fire in a compact mantel. It is approved for bedrooms and manufactured homes, and the remote runs the flame, heat and timer from across the room.
It is not right for you if you want a fireplace that hangs on the wall. The Woodland brings an existing fireplace or mantel back to life with four hand-painted logs, and needs no chimney or gas line.
Specifications
The log set measures 18" wide by 13-1/2" high by 13" deep and weighs 22.5 lb. It needs a fireplace opening at least 18" wide, 14" high and 14" deep, and sits 2" off the back wall for the flame effect. Keep furniture and curtains 36" from the front and leave the air intake and heat outlet clear. Power is 120 VAC, 60 Hz, 1,500 W on a dedicated, grounded 15 A circuit, plugged in or hard-wired. It is certified to CSA 22.2 No. 46 and UL 1278.
How the 18" compares to the Woodland 24" and 27"
All three run the same heater, remote and flame controls at the same 1,500 W maximum draw; they differ in size, in the opening they fill and in the log set. The Woodland 24" is 24" wide with five logs over front and rear ember beds and needs an opening 24" wide and 15" high, from $729. The Woodland 27" is 27" wide with six logs and needs 27-1/2" by 16", from $839, against from $629 for the 18".
Features
- The smallest Woodland — sets into an existing fireplace at least 18" wide, 14" high and 14" deep, or into a mantel opening, with no vent and no gas line
- Four hand-painted resin logs on a grate with charcoal embers, lit by LEDs with a moving flame effect
- Up to 5,000 BTU/hr heater with a heat-circulating blower and built-in thermostat — or lock the heat out and run the flame alone
- Three flame brightness levels, or the ember glow on its own
- Remote control and front control panel, with a 30-minute to 6-hour timer
- Plugs into a dedicated 120 V outlet or hard-wires
Answers to common questions
Will it fit my fireplace?
It needs an opening at least 18" wide, 14" high and 14" deep; the log set itself is 18" wide, 13-1/2" high and 13" deep, and sits 2" off the back wall for the best flame effect. For a larger opening the Woodland 24" needs 24" wide and 15" high, and the Woodland 27" needs 27-1/2" wide and 16" high.
Does it need a vent, a chimney or a gas line?
No. It is electric and needs only power: plug it into a grounded 120 V outlet on a dedicated 15 A circuit, or have an electrician hard-wire it. In an existing fireplace, clean out the ash first, then seal the chimney draft with a non-combustible material and cap the flue so rain and debris stay out. Extension cords and power strips are not allowed.
Can I keep my fireplace doors or screen?
Not doors that close it in — glass doors that shut or seal off the log set cannot be used, and if doors stay on the fireplace they must be left open so the heat can get out. A screen can stay as long as it lets air flow freely in front of the log set.
How much heat does it give, and can I run it without heat?
Up to 5,000 BTU/hr, on low or high (1,500 W maximum draw for the whole unit), with a blower that spreads it and a thermostat you can set from 61°F to 85°F. The flame and ember glow run with the heater off, the blower can run on its own, and the heater button can be locked out, so you can use it year-round.
What’s included, what’s required, and what’s optional?
-
Included in the box: Four-log set with grate and charcoal embers; Heater with heat-circulating blower and built-in thermostat; Remote control and front control panel; Cord and plug for a grounded 120 V outlet; 1-year parts warranty.
-
Required to complete the installation, purchased separately: Electrical - a dedicated, grounded 120 V, 15 A outlet within reach of the cord, or a hard-wired 120 V, 15 A supply installed by a qualified electrician; no extension cords or power strips; Fireplace prep - in an existing fireplace, an opening at least 18" wide, 14" high and 14" deep, cleaned of ash, with the chimney draft sealed with non-combustible material and the flue capped.
-
Optional: Hard-wiring in place of the plug — it runs fully on the supplied cord.
Where can it be used?
Indoors only, in a room between 41°F and 95°F. It is approved for bedrooms and manufactured homes, but not for bathrooms. Keep furniture, bedding and curtains 36" from the front, set it level on a hard surface rather than carpet, and with the heater on, keep young children supervised — a safety gate is a good idea where there are toddlers.
Does buying from The Torch Guys affect my Napoleon warranty?
Napoleon covers the Woodland with a one-year parts warranty — heaters, motors, switches, the remote and the LED lights included — and labour is not covered. The Torch Guys is an authorized Napoleon dealer, so the full factory warranty applies, and if you ever need a part we file the claim with Napoleon for you. Keep your invoice and the model and serial number.
Pro Portal
Dedicated Support
Best Price
Large Selection
Exclusive Deals
Priority Shipping
