Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Trade Pros Program

Get Exclusive Benefits

Trade Pros Program

Get Exclusive Benefits

Exclusive Pricing

Expedited Delivery

Dedicated Support

Click here to learn more
Hours: Mon-Sat - 8am-10pm EST
by Superior Authorized Dealer

Superior VRT6050 50" Traditional Vent Free Firebox

SKU VRT6050
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
50" x 30" full-brick-to-face-design opening
Fully insulated firebox with textured powder coat finish
Fireplace hood and mesh fire screens (must be in place to operate)
ANSI Z21.91-listed firebox enclosure
20-year limited warranty on body and firebox
🔧 Options
Above the Cart (select from dropdown)
Interior Panel: 16 Mosaic Masonry firebrick liners — Ivory, Midnight, Slate Grey or Warm Red in full or split brick, stacked or herringbone — or No Thanks
Below the Cart (select from optional accessories section)
Outside Air Kits
⚠️ Required to Complete Installation
Vent Free Burner/Log Set - any ANSI Z21.11.2-listed vent-free burner or log set up to 40,000 BTU/hr input — the firebox is the enclosure and burns nothing on its own
Interior Panel - one Mosaic Masonry firebrick liner; the firebox ships without an interior, and the sixteen Ivory, Midnight, Slate Grey and Warm Red liners on this page are the options (grout ships with the brick kit)
Gas Line - 1/2" black iron through the knockouts on either side, run by a qualified installer and connected before the wall is closed
Original price $3,589.00 - Original price $7,521.00
Original price
$3,589.00
$3,589.00 - $7,521.00
Current price $3,589.00

About This Product

Superior VRT6000 50" Vent-Free Gas Firebox with Mosaic Masonry Firebrick Liners

A 50" vent-free firebox with a 30" tall, full-brick-to-face opening — no chimney, no vent run. The Superior VRT6050 is the enclosure half of a vent-free fireplace: it hosts any ANSI Z21.11.2-listed vent-free gas log heater up to 40,000 BTU/hr input, sold separately. The interior is a Mosaic Masonry liner in true kiln-fired firebrick with mortared joints — sixteen combinations of Ivory, Midnight, Slate Grey and Warm Red in full or split brick, stacked or herringbone — and one liner is required, chosen on this page. from $3,589.

Choose the VRT6050 if you want the widest kiln-fired masonry look in the series where a chimney or vent run is impossible, and you want to pick the brick yourself — the fully insulated firebox frames to zero clearance, sits directly on an ordinary combustible floor, and burns the log set you pick separately.

It is not right for a bathroom, for a bedroom unless the log set you install is rated 10,000 BTU/hr or less, or for any bedroom or bathroom in Massachusetts, where vent-free products are barred from both statewide. It burns room air, so a tightly sealed space that cannot spare combustion air is also the wrong home for it. For those rooms, a sealed direct-vent fireplace such as Superior's DRT3000 or DRT3500 series is the one to look at instead.

Specifications

The firebox cabinet is 59-1/8" wide and 54-1/2" high; a straight-wall installation frames the rough opening in Figure 8 on page 12 of the installation manual, holding 1-1/2" of clearance at the sides and back, and a corner installation (Figure 9) sets that opening between two 71" angled walls, 100" across the corner. The interior runs 50" across the front, 21-3/4" deep and 30" high — the figures Superior publishes for sizing a compatible log set. Keep the ceiling at least 42" above the opening and flammable objects 36" from the front; a combustible mantel follows the stepped profile — 6-3/4" of projection at 16" above the hood opening, the full 12" at 20". Listed by PFS to ANSI Z21.91, Report F09-130.

How the VRT6050 compares to the other VRT6000 sizes

The three VRT6000 sizes share the same 30" tall opening, the same sixteen Mosaic Masonry liner choices and the same accessory list; they differ in width. This 50" starts at from $3,589 for the bare firebox, against the 36" at from $3,309 and the 42" at from $3,429. The corner installation's angled walls step from 61" on the 36" through 65" on the 42" to 71" here.

Features

  • 50" vent-free firebox with a 30" tall, full-brick-to-face opening
  • Mosaic Masonry liners in true kiln-fired firebrick — sixteen color-and-pattern combinations, one required and ordered on this page
  • Vent-free — no chimney and no vent run; the room supplies the log heater's combustion air
  • Hosts any ANSI Z21.11.2-listed vent-free gas log heater up to 40,000 BTU/hr input, sold separately
  • Fully insulated firebox for colder climates, with mesh fire screens included
  • Zero-clearance cabinet — framing can sit against the box everywhere but the standoff spacers

Answers to common questions

What’s included, what’s required, and what’s optional?
  • Included in the box: 50" x 30" full-brick-to-face-design opening; Fully insulated firebox with textured powder coat finish; Fireplace hood and mesh fire screens (must be in place to operate); ANSI Z21.91-listed firebox enclosure; 20-year limited warranty on body and firebox.
  • Required to complete the installation, purchased separately: Vent Free Burner/Log Set - any ANSI Z21.11.2-listed vent-free burner or log set up to 40,000 BTU/hr input — the firebox is the enclosure and burns nothing on its own; Interior Panel - one Mosaic Masonry firebrick liner; the firebox ships without an interior, and the sixteen Ivory, Midnight, Slate Grey and Warm Red liners on this page are the options (grout ships with the brick kit); Gas Line - 1/2" black iron through the knockouts on either side, run by a qualified installer and connected before the wall is closed.
  • Optional: Outside air kits (AK4 sidewall, AK4F floor — dual left/right kits available) and an approved cabinet mantel for freestanding installation — the firebox operates fully without them.
Does it come with the burner and logs?

No — the VRT6050 ships with no burner and no logs. It is a firebox enclosure: you pair it with any ANSI Z21.11.2-listed vent-free gas log heater up to 40,000 BTU/hr input, sold separately. Superior names its own Boulder Mountain, Wild Timber, Mossy Oak, Rugged Stack and Giant Timbers vent-free sets as compatible, and the interior measures 50" across the front, 21-3/4" deep and 30" high — the figures to check a log set against before you buy.

Does it need a chimney or a vent?

No — this firebox requires no outside venting or chimney, and nothing about it vents outside. The log heater it hosts uses air from the room, so the room must supply adequate combustion and ventilation air per the manual's worksheet; the optional outside air kits — dual left- and right-hand — duct extra air in where a home runs tight.

Where can it go — and where can't it?

Any ordinary living space that can spare combustion air — built into a flat wall or a corner, or freestanding under an approved cabinet mantel, directly on a combustible floor. A bedroom only works with a log set rated 10,000 BTU/hr or less, and never a bathroom; Massachusetts bars vent-free products from bedrooms and bathrooms entirely and requires a licensed plumber or gas fitter. Keep it out of RVs, high-traffic and drafty spots, note the 4,500 ft elevation caution for pilot outage, and set it on a metal or wood panel over carpet or tile.

How close can a mantel sit above it?

A combustible mantel shelf follows the manual's stepped profile above the hood opening — 1-1/2" of projection at 12" above it, 6-3/4" at 16", and the full 12" maximum at 20" — and no part of the shelf may cross that profile. Noncombustible material may project off the wall above the hood without restriction, and the ceiling stays at least 42" above the opening. Give us your mantel depth and we will read the profile with you.

How does the warranty work if something goes wrong?

Superior warrants the firebox, and The Torch Guys handles it for you — we register the appliance and, if you ever need to claim, we deal with the manufacturer on your behalf rather than handing you a phone number. The body and firebox carry a 20-year limited warranty. Keep your invoice and the model number; we hold the rest on file.

  • Model VRT6050
  • Brand Superior
  • Series Superior VRT6000 (Masonry Signature Series)
  • Venting Type Vent-free — no vent or chimney (ANSI Z21.91 firebox enclosure)
  • Viewing Area 50" W x 30" H (firebox opening)
  • Unit Width 59-1/8"
  • Unit Height 54-1/2"
  • Framing Width 59-3/8" (straight-wall rough opening, Figure 8)
  • Framing Height 54-5/8" (straight-wall rough opening, Figure 8)
  • Clearance (Top) 42" (firebox opening to ceiling; mantels per the manual profile)
  • Clearance (Sides) Per the manual side-clearance chart — see Figure 6, page 11 of the installation manual
  • Mobile Home Approved Yes — aftermarket, permanently located manufactured (mobile) homes where not prohibited by local codes
  • Hearth Requirement None — 0" floor clearance; metal or wood panel over carpet or tile other than wood flooring
  • Warranty 20 yr limited (body & firebox)

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.