Napoleon Arlington Direct Vent Gas Stove

The vent pipe and termination are sold separately; the stove ships with the firestop for a horizontal wall run. It vents through 4" exhaust / 7" intake coaxial direct vent pipe from a 45° top exit — out through a wall, up through the roof, or up a masonry chimney on a 3" co-linear liner — up to 20 ft horizontally or 40 ft vertically. Napoleon's GD-175 stove wall terminal kit includes its pipe, and Wolf Steel, Metal-Fab, BDM, Simpson DuraVent and Selkirk Direct Temp pipe is approved, the third-party systems each with the starter adaptor required for it. We can put the vent package together for your run.

Keep 2" to a combustible back wall (5" if you add the blower), 2" in a 45° corner and 48" from the top of the stove to the ceiling; the side-wall clearance is in section 3.9 on page 24 of the installation manual. Keep furniture 48" from the front. Wood flooring needs nothing underneath; on carpet, vinyl tile or another combustible floor the stove sits on a metal or wood panel covering its full width and depth.

• Included in the box: Metallic black cast-iron body with a glass door and safety screen; PHAZER ceramic-fibre log set, fibre burner and MIRRO-FLAME porcelain reflective panel; Flame/heat adjustment and the 100% SAFE GUARD gas control system; Gas flex connector with manual shut-off valve; Firestop spacer for a horizontal run through a wall; Napoleon President's Limited Lifetime Warranty.
• Required to complete the installation, purchased separately: Venting - 4" exhaust / 7" intake direct vent pipe and a wall or roof termination sized for your run, such as Napoleon's GD-175 stove wall terminal kit, which includes its pipe (see pg 9 in the installation manual); Gas Line - a 1/2" gas supply run to the stove's flex connector and shut-off valve by a qualified installer; Floor Panel - on carpet, vinyl tile or another combustible floor other than wood, a metal or wood panel under the full width and depth of the stove; Power - a grounded electrical outlet near the stove for the electronic model's power cord; the millivolt model needs none; Securing Kit - in a manufactured (mobile) home (natural gas only) the stove must be fastened in place; the leg leveling and stove securing kit (GDSLL-KT) does that.
• Optional: The blower kit, the remote controls, the wall mount control, the wall thermostat and, outside a mobile home, the leg leveling and securing kit — the stove runs without any of them.

Treat it as a fire to look at, not a heater. It burns 20,000 BTU/hr and puts out up to 14,000 BTU/hr, but Napoleon certifies it as a vented decorative gas appliance rather than a heat source. If you need a stove to heat a space, it is the wrong choice.

Both give you the same fire; the difference is how the pilot runs. With millivolt ignition a standing pilot stays lit, you light it with a push-button igniter, and the stove needs no electricity. With electronic ignition the pilot lights only when the stove is turned on, with an optional continuous-pilot mode that switches itself off after about seven days unused; it has a power cord and keeps working on four AA backup batteries in a power failure.

Yes to both, with one limit. It is approved for bedrooms, bathrooms, bed-sitting rooms, closets and recessed installations; the mobile-home approval covers the natural gas model, for a permanently located manufactured (mobile) home fueled with natural gas, where local codes allow. In a mobile home it must be fastened in place, which the leg leveling and stove securing kit (GDSLL-KT) does. That approval covers the natural gas model only.

No. Napoleon's President's Limited Lifetime Warranty covers the original purchaser who buys through an authorized Napoleon dealer and has the stove installed by a licensed, qualified installer; there is nothing to register, so keep your proof of purchase with the model and serial number. It covers the combustion chamber, heat exchanger, burner, logs and embers, ceramic glass (thermal breakage) and porcelain parts for as long as you own the stove, electrical and wearing parts for one year, and labour for the first year. The Torch Guys will help you with any claim.