Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by Napoleon Authorized Dealer

Napoleon 30" Linear Patioflame® Burner Kit

SKU GPFR60
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
Stainless steel burner pan and burner with valve, thermocouple, igniter, control panel and knob
Propane regulator and hose, and the natural gas orifice for conversion
Topaz glass embers
Napoleon President's 3 Year Limited Warranty
🔧 Options
Below the Cart (select from optional accessories section)
Glass Embers Media Kit
⚠️ Required to Complete Installation
Enclosure - a non-combustible base or table for the burner to drop into, built on site with a non-combustible frame, cabinet and top.
Gas Supply - a 20 lb propane cylinder with a QCC1 valve, or a natural gas line with its own shut-off valve run by a licensed gas fitter, who also fits the included natural gas orifice.
Cylinder Compartment - if the propane cylinder sits inside the base, a vented compartment partitioned off from the burner (see pages 10 and 11 in the installation manual).
Original price $719.00 - Original price $719.00
Original price
$719.00
$719.00 - $719.00
Current price $719.00

About This Product

Napoleon Patioflame Rectangle Burner Kit

60,000 BTU/hr maximum input on propane or natural gas, from a stainless steel burner pan 33-1/4" long, 11-3/4" wide and 2-3/4" deep. The Napoleon Patioflame GPFR60 is a drop-in fire pit burner for a non-combustible base you build. It ships ready for a 20 lb propane cylinder with its regulator and hose, includes the natural gas orifice for conversion, lights with a push-button electronic igniter, shuts its own gas off through a thermocouple safety valve if the flame goes out, and comes with a bed of topaz glass embers. It is $719, with 3 years of warranty coverage on the stainless housing and burner.

Choose the GPFR60 if you are building a long, narrow fire feature — a rectangular fire table, a ledge or a seat-height surround in stone, block or tiled cement board — and want a certified gas burner to set into it rather than a finished fire table.

It is not right for you if you want a ready-made fire table. The GPFR60 is a certified gas burner you set into a fire feature of your own design: a table, a ledge or a seat-height surround in stone, block or tile.

Specifications

The burner pan measures 33-1/4" by 11-3/4" and is 2-3/4" deep. Keep at least 24" from the burner to side walls all around, 72" from the top of the unit to a ceiling or other overhead cover, and 9" to the floor. Inlet pressure tops out at 7" w.c. on natural gas and 11" w.c. on propane. The enclosure layout, with the valve below the burner and the cylinder compartment, is drawn on pages 8 and 11 of the installation manual.

How the GPFR60 compares to the Patioflame GPFS60

The Patioflame GPFS60 is the square version of the same burner kit — the same 60,000 BTU/hr input on propane or natural gas, the same igniter, control knob and safety valve, the same warranty and topaz glass embers, in a 25-3/4" square pan instead of a 33-1/4" x 11-3/4" rectangle. The GPFR60 is $719; the GPFS60 is $719. Pick by the shape of the table or surround you are building.

Features

  • 60,000 BTU/hr maximum input on propane or natural gas, from a stainless steel burner in a 33-1/4" x 11-3/4" pan
  • Ships ready for a 20 lb propane cylinder with its regulator and hose, and includes the natural gas orifice for conversion
  • Push-button electronic igniter with a match-light backup, and a control knob that sets the flame from high to low
  • Thermocouple safety valve that shuts the gas off automatically if the flame goes out
  • Topaz glass ember bed included, with amber, clear, black, blue and red glass ember kits available
  • Drops into a non-combustible base you build, and is listed to the outdoor decorative gas appliance standard

Answers to common questions

What’s included, what’s required, and what’s optional?
  • Included in the box: Stainless steel burner pan and burner with valve, thermocouple, igniter, control panel and knob; Propane regulator and hose, and the natural gas orifice for conversion; Topaz glass embers; Napoleon President's 3 Year Limited Warranty.
  • Required to complete the installation, purchased separately: Enclosure - a non-combustible base or table for the burner to drop into, built on site with a non-combustible frame, cabinet and top; tiled cement board is the preferred surround, and the on/off valve must stay easy to reach; Gas Supply - a 20 lb propane cylinder with a QCC1 valve, or a natural gas line with its own shut-off valve run by a licensed gas fitter, who also fits the included natural gas orifice; Cylinder Compartment - if the propane cylinder sits inside the base, a vented compartment partitioned off from the burner (see pages 10 and 11 in the installation manual).
  • Optional: Glass ember kits in amber, clear, black, blue or red — the burner runs fully on the topaz glass embers it ships with.
Where can I install the GPFR60?

Outdoors only, on a patio or in the yard, in a well-ventilated spot — never inside a building, garage, screened-in porch or gazebo. A sheltered spot is best, because wind makes the flame erratic. Under a roof it can have no more than two side walls, or three if at least 30 percent of the perimeter stays permanently open. Keep 24" to side walls, 72" to a ceiling and 9" to the floor, and avoid spots with standing or running water.

Can the GPFR60 run on natural gas?

Yes. It ships set up for propane, and the natural gas orifice comes in the box. A licensed gas fitter swaps the orifice, leak tests the connections and runs the gas line, which needs a readily accessible manual shut-off valve ahead of the burner and has to be sized for 60,000 BTU/hr over the length of the run. Natural gas inlet pressure is 7.0" w.c. at most.

What can I build the base from?

Non-combustible materials only — the frame, the cabinet and the top all have to be non-combustible, and the material around the burner gets very hot, so it must be able to expand and contract without cracking. Tiled cement board is the preferred surround. Leave the on/off valve easy to reach once the burner is installed; the layout is drawn on page 8 of the installation manual.

Can the propane tank go inside the base?

Yes, one 20 lb cylinder can. The compartment needs vent openings near the top and at floor level, a partition between the cylinder and the burner, a door that does not lock, and at least 2" between its floor and the ground; sizes are on pages 10 and 11 of the installation manual. A 30 lb cylinder also works, but it sits outside the base on level ground.

How does it handle wind and rain?

Wind is the main thing to plan for — the burner shuts itself down in winds above 10 mph, so a sheltered spot works best. Turn it off when it rains, and keep it covered when it is not in use.

Does buying from The Torch Guys instead of a local store affect my Napoleon warranty?

No. Napoleon's President's 3 Year Limited Warranty covers the original purchaser who buys through an authorized Napoleon dealer and has the burner installed by a licensed, authorized technician or contractor, for normal home use. It covers the stainless steel housing and burner assembly for 3 years and all other parts for 2 years. Keep your bill of sale with the model and serial numbers for any claim, and The Torch Guys will help you with it.

  • Model GPFR60
  • Brand Napoleon
  • Series Napoleon Patioflame
  • Fuel Type Propane
  • BTU (Propane) 60,000 BTU/hr maximum input
  • BTU (Natural Gas) 60,000 BTU/hr maximum input (with the included natural gas orifice)
  • Ignition Type Push-button electronic igniter, with match-light backup
  • Overall Dimensions 33-1/4" L x 11-3/4" W x 2-3/4" D burner pan
  • Burner Stainless steel, with thermocouple safety valve and high/low control
  • Installation Drop-in burner for a non-combustible enclosure (enclosure not included)
  • Clearance (Sides) 24" to side walls, all around
  • Clearance (Top) 72" from the top of the unit to a ceiling
  • Outdoor Rated Yes — outdoor use only
  • Warranty 3 yr stainless housing and burner assembly / 2 yr all other parts

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.