The Voracious 37" Fire Pit Burner from Fire Garden
225,000 BTU/hr from a 37" stainless burner built to disappear into an enclosure you design — the Fire Garden Voracious 37" is a ready-to-finish outdoor fire pit burner, from $1,563. It ships configured for natural gas with the LP conversion kit in the box, takes a round or square base plate, and lights by pulse or 24v electronic ignition. Outdoor use only, on a fixed gas line.
Choose it if you're building the fire feature rather than buying one — the enclosure, finish, and media are yours; the listed burner, base plate, and fuel hardware are Fire Garden's.
It is not a fire pit on its own — there is no enclosure in the box, and it cannot sit on a patio as shipped. Outdoor only, fixed gas line only, no portable cylinders. Electronic ignition also needs the separately sold 24V transformer before it lights.
Specifications
Input is 225,000 BTU/hr on either fuel, with orifices (2) #19 NG / (2) #31 LP and 7" / 11" wc manifold pressures. The 24V electronic option draws 1.6 A at 24 VAC; pulse ignition runs on a single AAA battery. The burner weighs 50 lbs and its enclosure must be vented per the manual.
Which Voracious size?
The family runs 25" / 65,000 · 33" / 175,000 · 37" / 225,000 · 47" / 350,000 BTU/hr — same stainless construction, same included LP kit, same round-or-square plates. This 37" starts at from $1,563; the 25" starts at from $1,229. Size to the enclosure and the heat you actually want — the 25" is also the only size the manual approves for standalone match-light control.
Features
- 225,000 BTU/hr on natural gas or propane — the LP conversion kit ships in the box, so the fuel decision doesn't have to happen at checkout
- Ready-to-finish: the stainless burner and its base plate drop into an enclosure you build, with venting per the manual
- Round or square base plate kits match the burner to the enclosure shape
- Finish it with crushed glass (four colors), glass plus the optional Bonfire log set, or tumbled stone
- Listed to ANSI Z21.97-2017 / CSA 2.41-2017 as an outdoor decorative gas appliance (Omni-Test report 0028GM147S)
Answers to common questions
Is it natural gas or propane?
Both, one box: it ships configured for natural gas and the LP conversion kit is included. A qualified service agency performs the conversion — the orifice set for this size is (2) #19 NG / (2) #31 LP.
What’s included, what’s required, and what’s optional?
-
Included in the box: 22" stainless steel burner; 225,000 BTUs; 37" aluminum base plate (1/4" thick); Ships ready for natural gas with propane conversion kit included.
-
Required to complete the installation, purchased separately: Shape Plate Kit - Round or Square; Ignition System - Pulse or Electronic (the manual approves standalone match lighting on the 25" burner only); 24V Transformer (only needed for electronic ignition); Burning Display - Crushed Glass Media or Tumbled Stones; Gas Line - a fixed natural gas or propane line run by a qualified installer per the manual's requirements; Enclosure - built and vented per the manual's requirements.
-
Optional: Extras below the cart — cannon balls, emergency shut off, 120V remote for 24V ignition, vent kit with Dante valve, Z-brackets, 12" legs, and the media pan kit; the Bonfire log set fits this size.
Which ignition should I pick?
Pulse runs on one AAA battery; the 24V electronic system switches on and off from a wall switch and requires the separately sold 24V transformer. The manual approves standalone match lighting only on the 25" of this family, so this size's dropdown offers pulse and electronic — choose No Thanks only if you already have the ignition kit you need.
What media does it take, and how much?
Crushed glass (platinum, bronze, cobalt, or black), crushed glass with the optional Bonfire log set, or tumbled stone. Quantities are set per burner size in the manual's media sections — the options above are portioned to this size.
Any install rules to plan around?
Outdoor use only, in a well-ventilated area — never in a garage or enclosed space — on a fixed gas line. In Massachusetts a licensed plumber or gas fitter must install it, with a flexible connector no longer than 36".
What warranty applies?
Travis Industries' limited 7-year warranty on the burner assembly (parts, residential). Register at traviswarranty.com.
