Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by Napoleon Authorized Dealer

Napoleon Nexus 72" Patioflame® Fire Table

SKU GPFRCN72
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
Concrete-style rectangular fire table base with access door, cylinder support ring and leveling feet
Stainless steel burner with control panel, gas valve and flame-height knob
Push-button electronic igniter and thermocouple safety valve
Lava rock for the burner tray
Propane regulator and hose assembly
🔧 Options
⚠️ Required to Complete Installation
Gas supply - a 20 lb propane cylinder with a QCC1 valve, standing at least 60" from the table (a 30 lb cylinder may be used, on level ground).
One 1.5V AAA battery for the igniter.
An outdoor site with 24" of clearance to combustible side walls and 72" of open space above, ideally sheltered from the wind (the windscreen is an optional add-on, not a requirement).
Original price $2,999.00 - Original price $2,999.00
Original price
$2,999.00
$2,999.00 - $2,999.00
Current price $2,999.00

About This Product

Napoleon Nexus 72" Patioflame Fire Table

A 72" fire table built for a crowd. The Napoleon Nexus 72" Patioflame is a 72" x 27" concrete-style rectangular table, 15.5" high, with a 53,000 BTU/hr stainless steel burner under a lava rock bed, push-button electronic ignition and a thermocouple safety valve that shuts the gas off if the flame goes out. It runs from a 20 lb propane cylinder that stands on its support ring at least 60" from the table. from $2,999.

Choose it if you want a long, low fire table for a patio or deck that seats a group along both sides of the flame, runs from a 20 lb propane cylinder set at least 60" away, and can sit on a wood deck with the listed clearances.

It is not right for you if you want a compact fire table for a few chairs. The Nexus 72 is a long fire table that seats a group along both sides of the flame.

Specifications

The table is 72" long, 27" deep and 15.5" high, on a 64" x 19" base, and it is approved for use on combustible floors. Keep 24" to combustible side walls all around and 72" from the top of the unit to any ceiling or overhead. Propane inlet pressure runs from 8" to 13" w.c., and the supplied regulator delivers 11" w.c. It is listed to ANSI Z21.97-2017 / CSA 2.41-2017 for outdoor decorative gas appliances.

Nexus 72" vs. the Nexus 56"

The Nexus 56" (GPFRCN56) is the same 53,000 BTU/hr propane table with the same ignition, lava rock bed and warranty, in a shorter 56" x 27" top at the same 15.5" height. Pick the 72" for a long sectional or a big group and the 56" for a smaller patio — from $2,999 vs from $2,329.

Features

  • 53,000 BTU/hr propane burner running the length of a 72" x 27" concrete-style fire table
  • Lava rock bed included, laid over the stainless steel burner tray
  • Runs from a 20 lb propane cylinder that stands on its support ring at least 60" from the table
  • Push-button electronic ignition, with a thermocouple safety valve that shuts the gas off if the flame goes out
  • Approved for use on combustible floors, so it can sit on a wood deck with the listed clearances

Answers to common questions

Can I put it on a wood deck, and how much space does it need?

Yes. The table is approved for use on combustible floors. Keep 24" to combustible side walls all around and 72" of clear space above the top of the unit to any ceiling or overhead. It belongs outdoors on a patio, deck or in a yard, never inside a building, garage, screened-in porch or gazebo.

Does it need any venting?

No. It is an outdoor decorative gas appliance that burns in the open air, so there is no vent to run. What it needs instead is the right location: under an overhead cover it can have no more than two sidewalls, or three when at least 30% of the surrounding sides stay permanently open.

What’s included, what’s required, and what’s optional?
  • Included in the box: Concrete-style rectangular fire table base with access door, cylinder support ring and leveling feet; Stainless steel burner with control panel, gas valve and flame-height knob; Push-button electronic igniter and thermocouple safety valve; Lava rock for the burner tray; Propane regulator and hose assembly.
  • Required to complete the installation, purchased separately: Gas supply - a 20 lb propane cylinder with a QCC1 valve, standing at least 60" from the table (a 30 lb cylinder may be used, on level ground); One 1.5V AAA battery for the igniter; An outdoor site with 24" of clearance to combustible side walls and 72" of open space above, ideally sheltered from the wind (the windscreen is an optional add-on, not a requirement).
  • Optional: Natural gas conversion kit (S85005), installed by a licensed gas fitter, for running the table on a natural gas line instead of propane; 72" windscreen (GPF72-WNDSCRN) to shield the flame on an exposed patio — the table runs without it.
Can it run on natural gas?

Yes, with a kit. It ships as a propane unit. Napoleon's natural gas conversion kit (S85005) is sold separately through an authorized Napoleon dealer, and a licensed gas fitter has to do the conversion and connect the line.

Where does the propane tank go?

Outside the table. A 20 lb cylinder with a QCC1 valve sits in its support ring at least 60" from the table, with the hose kept out of walkways; a 30 lb cylinder can be used too, on level ground. Never set a cylinder on top of the table.

Can I use it in the rain or wind?

Turn it off when it rains, and do not use it if any part has been under water until a qualified technician has checked it. It keeps burning in a light breeze but shuts down when gusts top 10 mph, which is why a sheltered spot is best; Napoleon's 72" windscreen, sold separately, shields the flame.

How does the warranty work if I buy it online?

Napoleon's President's 3 Year Limited Warranty covers the table top and pedestal, the stainless steel housing and the burner assembly for 3 years and all other parts for 2 years, with replacement parts supplied by Napoleon; labour is not covered. It applies to a home installation done by a licensed technician or contractor. The Torch Guys is an authorized Napoleon dealer, so the full factory warranty applies, and if you ever need a part we file the claim with Napoleon for you. Keep your invoice and the model and serial number.

  • Model GPFRCN72
  • Brand Napoleon
  • Series Napoleon Nexus Patioflame Table Series
  • Fuel Type Propane (natural gas with the separate S85005 conversion kit)
  • BTU (Propane) 53,000 BTU/hr
  • Ignition Type Push-button electronic igniter with thermocouple safety valve
  • Burner Stainless steel burner with insect screen
  • Overall Dimensions 72" L x 27" D x 15.5" H
  • Installation Freestanding table; approved for use on combustible floors
  • Clearance (Sides) 24" (side walls, all around)
  • Clearance (Top) 72" (top of unit to ceiling)
  • Outdoor Rated Yes — outdoor use only
  • Certifications ANSI Z21.97-2017 / CSA 2.41-2017 (outdoor decorative gas appliance)
  • Includes Lava rock, propane regulator and hose, cylinder support ring
  • Warranty 3 yr table top and pedestal, stainless steel housing and burner / 2 yr all other parts

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.