Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by Majestic Authorized Dealer

Majestic Villawood 42" Outdoor Wood Burning Fireplace

SKU ODVILLA-42T-B
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
42" x 20-7/8" viewing area
Brick refractory interior
Fireplace grate
Firescreen
Dual cooling air kit
Two protective metal hearth strips
Gas line knockouts on both sides
UL 127 and ULC-S610 listing
Outdoor Lifestyles limited lifetime warranty on the body and firebox
🔧 Options
Above the Cart (select from dropdown)
Interior Panel: Traditional Brick or Herringbone Brick
Glass Door: Bi-Fold Glass Door or No Thanks
Below the Cart (select from optional accessories section)
Drain Pan, Chimney Air Kit
⚠️ Required to Complete Installation
Venting - an 8" SL300 Series chimney and a listed termination cap (see pg 44 in the manual).
Floor Protection - a hearth extension 20 inches deep and 66 inches wide, insulated to R 1.03 and finished in a non-combustible material.
Facing - stone, tile or other non-combustible material over the metal front of the fireplace.
Original price $1,839.00 - Original price $2,668.00
Original price
$1,839.00
$1,839.00 - $2,668.00
Current price $1,839.00

About This Product

Majestic Villawood 42" Outdoor Wood Burning Fireplace

A 42-inch wide open wood fire built for the outdoors. The Majestic Villawood 42 is a UL 127 and ULC-S610 listed outdoor wood burning fireplace with a 42" x 20-7/8" viewing area, a brick interior, a grate and a firescreen in the box. It frames 48" wide by 39-3/4" high by 21-1/2" deep and vents through an 8" SL300 Series chimney. Choose a traditional or herringbone interior above, and add bi-fold glass doors if you want them; from $1,839.

Choose the Villawood if you want a real wood fire on a deck, on a patio or in an outdoor kitchen, with the look of masonry and nothing between you and the fire. The brick interior, grate, firescreen and cooling air kit come with it, so the only things to pick are the interior pattern and whether to add doors.

It is not right for you if you want a flame that starts at the flip of a switch. The Villawood is built around the ritual of a real wood fire, laid on a steel grate and open to the outdoors.

Specifications

The fireplace measures 47" wide at the front, 29-3/4" at the back, 39-1/2" high and 21-3/8" deep, and weighs 205 pounds with the traditional interior or 220 with the herringbone. Frame it 48" wide, 39-3/4" high and 21-1/2" deep, with 1/2" of air space at the back and sides and 12" from the opening to a combustible side wall. The chimney is SL300 Series, 8" inner, at least 14.5 feet from the base of the fireplace and no more than 90.

How the Villawood 42 compares to the Villawood 36

Both Villawoods are 39-1/2" high and 21-3/8" deep, with a 20-7/8" tall viewing area and the same 8" SL300 Series chimney; width is the difference. The 42 has a 42-inch wide viewing area and frames 48" wide. The 36 has a 36-inch wide viewing area and frames 42" wide. The Villawood 42 starts from $1,839 and the Villawood 36 from $1,609.

Features

  • 42" x 20-7/8" viewing area on a UL 127 and ULC-S610 listed outdoor wood burning fireplace
  • Open hearth with a spark-catching firescreen, and bi-fold glass doors as an option
  • Traditional or herringbone brick interior, in the box with the grate
  • Dual cooling air kit and metal hearth strips come standard
  • Stainless steel construction engineered for long-term outdoor use

Answers to common questions

What chimney does the Villawood 42 need, and is it included?

It uses SL300 Series chimney, 8 inches inside, with a listed termination cap (see pg 44 in the manual), and the chimney and cap are sold separately. Plan on at least 14.5 feet from the base of the fireplace, straight or with one offset and return, 20 feet with two, and no more than 90 feet. Freestanding and at least 10 feet from a combustible structure, it can be as short as 6 feet 4 inches. The bottom of the cap sits at least 3 feet above the roof and 2 feet above any part of the roof within 10 feet. In Canada you also need a CAK4A chimney air kit and a CAS8 attic shield kit. Give us your chimney height and our team will build the package.

What’s included, what’s required, and what’s optional?
  • Included in the box: 42" x 20-7/8" viewing area; Brick refractory interior; Fireplace grate; Firescreen; Dual cooling air kit; Two protective metal hearth strips; Gas line knockouts on both sides; UL 127 and ULC-S610 listing; Outdoor Lifestyles limited lifetime warranty on the body and firebox.
  • Required to complete the installation, purchased separately: Venting - an 8" SL300 Series chimney and a listed termination cap (see pg 44 in the manual); give us your chimney height and our team will build the package; Floor Protection - a hearth extension 20 inches deep and 66 inches wide, insulated to R 1.03 and finished in a non-combustible material; Facing - stone, tile or other non-combustible material over the metal front of the fireplace.
  • Optional: Bi-fold glass doors, a drain pan (recommended on wood surfaces), the chimney air kit (required in Canada) and a vented gas log set - the fireplace burns wood without them.
Can it go inside, or on a deck?

Outside only. It has no flue damper, so it cannot be installed indoors. Build it into a chase outside the weather envelope against an exterior wall, or stand it on a porch, a patio or in the yard inside an enclosure that protects it from impact. It sheds moderate water but is not waterproof, so a drain pan is recommended on wood surfaces or wherever water can collect.

What goes on the floor in front of it?

A hearth extension 20 inches deep and 66 inches wide, which is 12 inches past each side of the opening, insulated to at least R 1.03 and finished in tile, stone or another non-combustible material. Its surface sits at least 4 inches below the bottom of the opening unless the fireplace stands on a non-combustible surface. The two metal hearth strips in the box go under the front edge.

How close can a mantel or side wall be?

A combustible mantel up to 12 inches deep goes at least 12 inches above the top of the opening. Combustible trim stays 6 inches from the opening, and anything projecting more than 1-1/2 inches stays 12 inches from its top. Combustible side walls stay at least 12 inches from the opening; mantel legs and wall projections are drawn in Figure 11.11 on page 40 of the manual. Keep combustible objects 48 inches from the front. Send us your plan if you want it checked. We're here to help!

Can I put gas logs in it?

A certified vented gas log set or gas log lighter can go in, up to 100,000 BTU/hr, with its own gas shutoff and the gas line through a knockout on either side. Unvented gas logs must not be installed. Call us and we will match a vented set to your fireplace.

Do I need the glass doors?

No. The Villawood is an open hearth with its firescreen, and the bi-fold glass doors are optional. If you add them, run them fully open or fully closed while the fire is burning.

Does buying from The Torch Guys affect my Majestic warranty?

No. The Outdoor Lifestyles warranty covers products bought through an authorized dealer, and The Torch Guys is one. The body, metal firebox and heat exchanger carry a limited lifetime warranty from installation; gas and electrical parts, glass and refractory breakage, venting, accessories, doors and warranty labor carry one year. We will help you with any claim.

  • Model ODVILLA-42T-B / ODVILLA-42H-B
  • Series Majestic Villawood
  • Fuel Type Wood
  • Venting Type SL300 Series chimney, 14.5 ft minimum, 90 ft maximum straight height
  • Flue Size 8"
  • Viewing Area 42" W x 20-7/8" H
  • Unit Width 47" (front), 29-3/4" (back)
  • Unit Height 39-1/2"
  • Unit Depth 21-3/8"
  • Framing Width 48"
  • Framing Height 39-3/4"
  • Framing Depth 21-1/2" (plus any drywall inside a chase)
  • Clearance (Top) 0" to the level of the standoffs; 2" from the chimney to the header
  • Clearance (Sides) 1/2" (12" from the opening to a combustible side wall)
  • Clearance (Back) 1/2"

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.