Fireside Finishings Fillmore 72" Wood Mantel Shelf
What's Included?
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
A 72-inch mantel shelf, 8" deep and 2-1/2" tall, that mounts on a ledger board screwed into your wall studs. The Fireside Finishings Fillmore has a slim 2-1/2-inch face — the shallowest shelf in the range. Primed mdf arrives sealed and ready for your paint colour; unfinished maple arrives raw for you or your finisher to stain or seal on site. Four factory stains are available on the maple. from $489.
Choose the Fillmore if you want the least visually heavy option, or the wall above the opening is tight — Baxter, Crosby and Ozark all stand taller.
It is not right if your fireplace needs a full flush mantel with legs framing the opening — this is a shelf only. It also does not set your clearances: how far the shelf must sit above the opening is dictated by your fireplace manufacturer's instructions, and on some units that distance rules a shelf out entirely.
The shelf measures 72" wide, 8" deep and 2-1/2" tall. It hangs on a ledger board fastened into pre-marked stud locations, then pins to that ledger through pre-drilled holes, and is caulked to the wall in a matching colour.
All the Fillmore shelves share the same depth, height and finish range; only the length changes. This one is from $489, against from $409 and from $449. Pick the length off your fireplace opening and the wall around it, not off the firebox alone.
That is set by your fireplace, not by the shelf. The instructions cover the shelf only and tell you to follow the fireplace manufacturer's installation instructions so the required clearances are met. Check the clearance to combustibles for your firebox before you pick a mounting height — send us the model number and we will look it up with you.
A ledger board goes up first, screwed into pre-marked stud locations. The shelf then drops over that ledger and pins to it with nails through pre-drilled holes. The manufacturer does not publish a weight rating for the shelf, so we will not quote one — if you are planning to load it up, ask us first.
Yes — Ebony, Provincial, New Gray and Whitewash are applied at the factory before it ships, to the unfinished maple shelf. Stained shelves are non-stock, so allow extra lead time.
No. The Torch Guys is an authorized Fireside Finishings dealer, and we handle warranty registration and any claim on your behalf — you do not chase the manufacturer yourself.