Fireside Finishings Kenwood B 65" Flush Wood Mantel
What's Included?
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
A flush wood mantel that frames a 48" by 39-1/2" fireplace opening, 65" wide and 51-3/4" high overall, projecting 5" from the wall. The Fireside Finishings Kenwood has a transitional frame with a deep 9-3/4-inch shelf, in MDF or unfinished maple. Primed mdf arrives sealed and ready for your paint colour; unfinished maple arrives raw for you or your finisher to stain or seal on site. from $839.
Choose the Kenwood if you want the deepest shelf of any flush mantel in the range.
It is not right if your fireplace opening is larger than the dimensions above — a flush mantel frames the opening and cannot be cut down. It also does not set your clearances: the mantel instructions cover the mantel only, and how far it must sit from the opening is dictated by your fireplace manufacturer's instructions.
The opening measures 48" wide by 39-1/2" high. Overall the mantel is 65" wide and 51-3/4" high, with a 74-1/2" top, 8" legs and a 9-3/4" shelf, projecting 5" from the wall. It ships flat and assembles on site.
Every Kenwood shares the same profile, finish range and detailing; the sizes differ in the opening they frame. This one is from $839, against from $789 and from $839 and from $869. Measure your fireplace opening first — the mantel has to clear it, and that is what picks the size.
Measure the fireplace opening. This size frames an opening up to 48" wide by 39-1/2" high, and sits 65" wide by 51-3/4" high on the wall. If your opening is larger, move up a size — a flush mantel frames the opening and cannot be trimmed to fit.
That is set by your fireplace, not by the mantel. The mantel's own instructions are explicit that they cover the mantel only and that you follow the fireplace manufacturer's installation instructions so the required clearances are met. Send us your firebox model and we will look up the clearance to combustibles with you.
Yes — Ebony, Provincial, New Gray and Whitewash are applied at the factory before it ships. Stained mantels are non-stock, so allow extra lead time.
No. The Torch Guys is an authorized Fireside Finishings dealer, and we handle warranty registration and any claim on your behalf — you do not chase the manufacturer yourself.