Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by Majestic Authorized Dealer

Majestic Echelon II 36" Linear Direct Vent Gas Fireplace

SKU ECHEL36IN-C
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
Bronze Glass Media
IFT-RC400 IntelliFire Touch remote control
Dimmable LED lights
Up to 30,000 BTU/hr input on natural gas or 27,000 on propane
IntelliFire Touch electronic ignition
Battery backup (four AA batteries)
5 mm ceramic glass
Non-combustible facing board, junction box, manual gas shut-off valve and flex connector
Exhaust restrictor for tall vertical vent runs
🔧 Options
Above the Cart (select from dropdown)
Fuel Type: Natural Gas or Propane
Front: Clean Face trim in black, gun metal, new bronze or stainless steel, the black Picture Frame front, or No Thanks
Burning Display: diamond, onyx or sapphire crushed glass, natural stones, or No Thanks
Below the Cart (select from optional accessories section)
Interior Panels, Wall Switch, Wi-Fi Module and Battery Backup, Heat Management, Driftwood Log Set
⚠️ Required to Complete Installation
Front - a decorative front with a built-in mesh barrier screen.
Venting - DVP direct vent pipe and a wall or roof termination sized for your run (see pgs 79-86 in the installation manual).
Electrical - an unswitched 110-120 VAC circuit to the junction box.
Gas Line - a 1/2" gas line to the shut-off valve.
Original price $4,699.00 - Original price $5,818.00
Original price
$4,699.00
$4,699.00 - $5,818.00
Current price $4,699.00

About This Product

Majestic Echelon II 36" Linear Direct Vent Gas Fireplace

The Majestic Echelon II 36" is a linear direct vent gas fireplace with IntelliFire Touch electronic ignition, battery backup, dimmable LED lights and the IFT-RC400 remote included: up to 30,000 BTU/hr input on natural gas or 27,000 on propane, bronze glass media standard, a 48-1/4" wide, 42" high and 18-1/4" deep framed opening and DVP top venting, from $4,699. It is finished with a decorative front, with Clean Face trim in four finishes or a black Picture Frame front.

Choose the Echelon II 36" if you want a linear fire you can restyle: bronze glass is standard, diamond, onyx or sapphire crushed glass or natural stones can replace it, and a Driftwood log set and a reflective black glass liner kit are available. The LED lights that illuminate the glass media are dimmable from the included remote, it frames with only 1" of clearance at the back and sides and no raised hearth, and it is certified for bedrooms.

It is not right for you if you want a traditional fireplace with a brick-look interior. The Echelon II 36" is a clean linear design that sets its flames over a bed of glass lit by dimmable LED lights.

Specifications

The framed opening is 48-1/4" wide, 42" high and 18-1/4" deep, and the fireplace itself is 46-3/16" wide, 41-3/4" high and 17-1/8" deep, with a 35-1/2" x 12-1/2" glass. Keep 1" of clearance at the back and sides and 31" from the top of the opening to the ceiling, and no raised hearth is needed. The non-combustible facing board ships with the fireplace. Mantel clearance depends on the mantel's depth and is charted in Figure 10.12 on page 71 of the installation manual, with a separate chart in Figure 10.14 for the Passive Heat Kit. It takes a 1/2" gas line and an unswitched 110-120 VAC circuit.

How the Echelon II 36" compares to the Echelon II 48"

Every single-sided Echelon II shares the bronze glass media, LED lights, IntelliFire Touch ignition, the included remote and DVP top venting. The Echelon II 36" runs 30,000 BTU/hr on natural gas and frames 48-1/4" wide, from $4,699. The Echelon II 48" runs 40,000 BTU/hr and frames 60-1/4" wide, from $5,929.

Features

  • IFT-RC400 IntelliFire Touch remote included, with dimmable LED lights built in under the media
  • Bronze glass media standard, with diamond, onyx or sapphire crushed glass or natural stones offered above
  • IntelliFire Touch electronic ignition with battery backup for power outages
  • Up to 30,000 BTU/hr input on natural gas and 27,000 on propane
  • Certified for bedrooms and bedsitting rooms
  • Heat-Zone, Heat-Out and Passive Heat options, plus an optional Driftwood log set and reflective black glass liner kit

Answers to common questions

What venting does the Echelon II 36" need?

It vents off the top only, on Hearth & Home Technologies DVP direct vent pipe, out through a wall or up through the roof: straight up from 2-1/2 ft to 50 ft with no elbows, or up to 63 ft of total run with elbows, of which up to 24 ft can be horizontal, and no more than three 90-degree elbows. It needs 18" of vertical pipe off the top before any elbow. An exhaust restrictor comes with it for tall vertical runs. It is also approved for the PVLP-SLP, PVI-SLP-B and PVV-SLP power vents with a power vent wire harness and the included IFT-RC400 remote, though a power vent cannot be used with a wall switch. Our team builds the vent package for your run; the approved parts are on pages 79 to 86 of the installation manual and the termination clearances on pages 28 to 30.

What’s included, what’s required, and what’s optional?
  • Included in the box: Bronze Glass Media; IFT-RC400 IntelliFire Touch remote control; Dimmable LED lights; Up to 30,000 BTU/hr input on natural gas or 27,000 on propane; IntelliFire Touch electronic ignition; Battery backup (four AA batteries); 5 mm ceramic glass; Non-combustible facing board, junction box, manual gas shut-off valve and flex connector; Exhaust restrictor for tall vertical vent runs.
  • Required to complete the installation, purchased separately: Front - a decorative front with a built-in mesh barrier screen; Venting - DVP direct vent pipe and a wall or roof termination sized for your run (see pgs 79-86 in the installation manual); Electrical - an unswitched 110-120 VAC circuit to the junction box; Gas Line - a 1/2" gas line to the shut-off valve.
  • Optional: A wireless wall switch, Wi-Fi module or battery backup wall switch, the reflective black glass liner kit, heat management and the Driftwood log set; the fireplace operates without any of them.
How much glass or stone do I need if I change the media?

The bronze glass ships with the fireplace. To change it, the 36" takes 3 bags of crushed glass or 2 bags of natural stones, and choosing one above adds the right number of bags. If you add the Driftwood log set with stones, it takes 1 bag of stones. Glass goes in a single layer on the base pan and never in front of the pilot.

How is it controlled?

The IFT-RC400 IntelliFire Touch remote comes with it, paired at the factory, and adjusts the flame height and the LED lights. You can add the IFT-RC150 wireless wall switch, the Wi-Fi module for the IntelliFire app, or a battery backup wall switch; a hard-wired wall switch limits what the remote can do. The Heat-Zone kit also runs from the RC400. Battery backup keeps the fireplace lighting in a power outage, though the lights do not run on battery.

Can I mount a TV above it?

Yes, with planning. Majestic's good faith guideline for a TV on the wall is the underside of a combustible mantel at least 23" above the top of the opening (18" if the mantel is non-combustible), the TV 2" to 3" above the mantel, and the mantel projecting 2-1/2" beyond the face of the TV. For a TV recessed into the wall, the underside of a combustible mantel below it sits at least 46" above the top of the opening, with the TV 2" to 3" above that mantel. With the optional Passive Heat Kit no mantel is needed: 12" from the opening to the bottom of the TV and 4" from the top of the TV to the discharge opening (Figure 10.19 on page 73). The kit goes in with the fireplace, while its top is accessible. Always stay within your TV maker's own temperature limits.

Where can it be installed?

Inside a framed wall, with 1" of clearance at the back and sides, 31" from the top of the opening to the ceiling and 48" clear in front. It can sit directly on a wood or metal floor, but not on carpet, vinyl or tile, with no raised hearth, or be raised off the floor on a platform. It is certified for bedrooms and bedsitting rooms, and may be installed as an OEM installation in a manufactured or mobile home. Adhesive vinyl flooring is not recommended. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.

What gas and electrical connections does it need?

It takes a 1/2" gas line to the shut-off valve and flex connector that come with it, plus an unswitched 110-120 VAC circuit wired with 14-2 AWG with ground to the junction box. Inlet pressure is 5" to 10" w.c. on natural gas and 11" to 13" w.c. on propane. It ships for natural gas; choosing Propane above adds the LPK-ECHEL36 conversion kit, which a qualified technician installs.

Does buying from The Torch Guys affect my Majestic warranty?

No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas fireplace the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners and metal or fiber refractory 10 years on parts and 1 on labor, electrical components and glass liner panels 2 years, and all other parts 1 year. We will help you with any claim.

  • Model ECHEL36IN-C (natural gas; propane with LPK-ECHEL36)
  • Fuel Type Natural Gas or Propane (choose above)
  • Venting Type Direct vent, DVP pipe, top vent
  • Ignition Type IntelliFire Touch intermittent pilot, with battery backup
  • BTU (Natural Gas) 30,000 BTU/hr high / 17,500 low
  • BTU (Propane) 27,000 BTU/hr high / 15,000 low
  • Viewing Area 35-1/2" W x 12-1/2" H (glass size)
  • Unit Width 46-3/16"
  • Unit Height 41-3/4"
  • Unit Depth 17-1/8"
  • Framing Width 48-1/4"
  • Framing Height 42"
  • Framing Depth 18-1/4"
  • Clearance (Sides) 1"
  • Clearance (Back) 1"

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Hearth & Home Technologies LLC Warranty Coverage

Highlights:

1 Year Coverage - Gas, Wood, Pellet, Venting Products

2 year Coverage - Electric Products

*exclusion apply click link below for Full Warranty

HHT Lifetime Warranty