Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by Majestic Authorized Dealer

Majestic Marquis II 42" See Through Direct Vent Gas Fireplace

SKU MARQ42STIN
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
Up to 57,500 BTU/hr on natural gas or 52,000 on propane
IntelliFire Touch electronic ignition
IFT-RC400 touchscreen remote
Battery backup (four AA batteries, not included)
11 ceramic fiber split logs
Ember bed materials, with lit embers and accent lights
5 mm ceramic glass with an anti-reflective coating
Non-combustible board and finishing strips, junction box, gas flex connector
🔧 Options
Above the Cart (select from dropdown)
Fuel Type: Natural Gas or Propane
Front: Firescreen Front - Black, Firescreen Front - Gun Metal, Firescreen Front - New Bronze, or No Thanks
Interior Panel: Traditional Brick - Tavern Brown, Traditional Brick - Cottage Red, or No Thanks
Below the Cart (select from optional accessories section)
Wi-Fi Module, Battery Backup Wall Switch, Heat Management
⚠️ Required to Complete Installation
Front - two decorative fronts, one for each face, each with a built-in barrier screen.
Interior Panel - brick panels that line the firebox.
Venting - 8" DVP direct vent pipe and a wall or roof termination sized for your run (see pg 51 in the installation manual).
Electrical - an unswitched 110-120 VAC circuit to the junction box.
Gas Line - a gas line to the 1/2" shut-off valve.
Original price $9,709.00 - Original price $12,540.00
Original price
$9,709.00
$9,709.00 - $12,540.00
Current price $9,709.00

About This Product

Majestic Marquis II 42" See Through Direct Vent Gas Fireplace

The Majestic Marquis II 42" See-Through is a direct vent gas fireplace that opens on both faces, built into a wall between two spaces: up to 57,500 BTU/hr on natural gas or 52,000 on propane, 11 ceramic fiber split logs over a lit ember bed, IntelliFire Touch electronic ignition and the IFT-RC400 touchscreen remote standard, a 60-1/4" wide, 46-1/2" high and 30" deep framed opening and an 8" top vent, from $9,709. It takes two firescreen fronts and a set of brick interior panels.

Choose the Marquis II See-Through if you want one fire seen from two spaces, with the look of a traditional log fire: 11 ceramic fiber split logs, a lit ember bed and brick panels in Tavern Brown or Cottage Red. The touchscreen remote comes with it, firescreen fronts come in black, gun metal or new bronze, and it is certified for bedrooms.

It is not right for you if you are looking for a contemporary bed of crushed glass. The Marquis II See-Through sets 11 ceramic fiber split logs over a lit ember bed, framed by brick panels, for a traditional fire you can see from both sides.

Specifications

The framed opening is 60-1/4" wide, 46-1/2" high and 30" deep, adjusted for any interior sheathing, and the fireplace itself is 60" wide across its top flange, 46-3/8" high and 30-3/8" deep. Keep 1" of clearance at the sides, 33" from the top of the fireplace to the ceiling and 36" clear in front of each face. The non-combustible board ships with the fireplace. A mantel up to 12" deep sits at least 10" above the opening, whether it is combustible or not (Figures 10.2 and 10.3 on page 38 of the installation manual). It takes an unswitched 110-120 VAC circuit and connects to your gas line at a 1/2" shut-off valve.

How the See-Through compares to the single-sided Marquis II 42"

The See-Through opens on both faces, runs 57,500 BTU/hr on natural gas and frames 60-1/4" wide, 46-1/2" high and 30" deep, from $9,709, and it takes two fronts. The single-sided Marquis II 42" runs 54,500 BTU/hr and frames 65-9/16" wide, 61" high and 24" deep, from $6,839. Choose the See-Through when the fire needs to reach two spaces.

Features

  • Opens on both faces, built into a wall between two spaces
  • A set of 11 ceramic fiber split logs over a lit ember bed, with accent lights
  • IFT-RC400 touchscreen remote standard, with flame height, thermostat, lights and ember bed control
  • Up to 57,500 BTU/hr on natural gas and 52,000 on propane
  • IntelliFire Touch electronic ignition with battery backup for power outages
  • Certified for bedrooms and bedsitting rooms

Answers to common questions

What venting does the Marquis II See-Through need?

It vents off the top only, on 8" DVP direct vent pipe, out through a wall or up through the roof. Straight up, it runs from 3 ft to 50 ft with no elbows. It needs at least 24" of vertical pipe off the top before any elbow. Horizontal reach depends on the rise before it: 4 ft of horizontal on 4 ft of rise, 20 ft on 10 ft and 40 ft on 20 ft with one elbow, and no more than 20 ft in total with two elbows. A wall termination run totals no more than 60 ft. It is approved for the PVLP-SLP and PVI-SLP-B power vents with a wire harness, and the remote they call for comes with the fireplace. Our team builds the vent package for your run; the parts are on pages 51 to 56 of the installation manual and the diagrams for roof terminations with elbows on pages 21 and 22.

What’s included, what’s required, and what’s optional?
  • Included in the box: Up to 57,500 BTU/hr on natural gas or 52,000 on propane; IntelliFire Touch electronic ignition; IFT-RC400 touchscreen remote; Battery backup (four AA batteries, not included); 11 ceramic fiber split logs; Ember bed materials, with lit embers and accent lights; 5 mm ceramic glass with an anti-reflective coating; Non-combustible board and finishing strips, junction box, gas flex connector.
  • Required to complete the installation, purchased separately: Front - two decorative fronts, one for each face, each with a built-in barrier screen; Interior Panel - brick panels that line the firebox; Venting - 8" DVP direct vent pipe and a wall or roof termination sized for your run (see pg 51 in the installation manual); Electrical - an unswitched 110-120 VAC circuit to the junction box; Gas Line - a gas line to the 1/2" shut-off valve.
  • Optional: A Wi-Fi module, a battery backup wall switch and heat management; the fireplace operates without any of them.
Why does it need two fronts?

Because it opens on both faces, each side takes its own firescreen front. Choosing a finish above adds both, in black, gun metal or new bronze. The fronts ship in a separate box, and the fireplace is not run without them.

Are heat management kits available?

Yes, both are optional. The Heat-Zone Gas kit draws heat to an adjacent room up to 20 ft away. It goes in before the fireplace is set in its final position, and controlling it from the remote takes a wire plug assembly ordered separately. The Heat-Out kit sends heat outside through 25 ft of duct, with a brick extension kit for a brick wall.

Can I put a mantel above it?

Yes. A mantel up to 12" deep sits at least 10" above the opening, whether it is combustible or not: Figure 10.2 on page 38 of the installation manual covers a combustible mantel and Figure 10.3 on the same page a non-combustible one. Wall surface temperatures above the opening are charted in Figure 2.1 on page 6. Send us your mantel depth and we'll help.

Where can it be installed?

Indoors, inside a framed wall between two spaces, with 1" of clearance at the sides, 33" from the top of the fireplace to the ceiling and 36" clear in front of each face. It is not designed or approved as an indoor/outdoor fireplace. It sits on a hard metal or wood surface and not directly on carpet, vinyl or tile. It is certified for bedrooms and bedsitting rooms, and may be installed as an OEM installation in a manufactured or mobile home. Adhesive vinyl flooring is not recommended. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.

What gas and electrical connections does it need?

Your gas line connects at the 1/2" shut-off valve with its flexible connector, and the fireplace needs an unswitched 110-120 VAC circuit to the junction box. Inlet pressure is 5" to 10" w.c. on natural gas and 11" to 13" w.c. on propane. It is built for natural gas, and choosing Propane above adds the conversion kit, which a qualified service technician installs.

Does buying from The Torch Guys affect my Majestic warranty?

No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas fireplace the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners, logs and metal or fiber refractory 10 years on parts and 1 on labor, electrical components and glass liner panels 2 years, and all other parts 1 year. We will help you with any claim.

  • Model MARQ42STIN
  • Series Majestic Marquis II
  • Fuel Type Natural Gas or Propane (choose above)
  • Venting Type Direct vent, 8 in. DVP, top vent
  • Ignition Type IntelliFire Touch intermittent pilot, with battery backup
  • BTU (Natural Gas) 57,500 BTU/hr high / 43,000 low
  • BTU (Propane) 52,000 BTU/hr high / 39,000 low
  • Unit Width 60"
  • Unit Height 46-3/8"
  • Unit Depth 30-3/8"
  • Framing Width 60-1/4"
  • Framing Height 46-1/2"
  • Framing Depth 30"
  • Clearance (Top) 33"
  • Clearance (Sides) 1"

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.