Majestic Marquis II 42" Direct Vent Gas Fireplace
What's Included?
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
The Majestic Marquis II 42" is a direct vent gas fireplace with seven ceramic fiber split logs, IntelliFire Touch electronic ignition with battery backup and an RC400 touchscreen remote: up to 54,500 BTU/hr on natural gas or 47,500 on propane, LED ember bed and accent lighting, a 65-9/16" wide, 61" high and 24" deep framed opening and an 8" top vent, from $6,839. A Firescreen front and an interior panel complete it, and both are sold separately.
Choose the Marquis II 42" if you want a log fire with the controls already included: the RC400 remote sets flame height, thermostat mode, timer and lights, and the ignition keeps working through a power outage on battery backup. You pick the interior, in traditional or herringbone Tavern Brown brick or reflective black glass, and it is certified for bedrooms.
It is not right for you if you are looking for a long, low linear flame. The Marquis II 42" has a tall 41-7/8" by 36-1/16" firebox opening filled with seven ceramic fiber split logs and an LED ember bed, so it reads as a log fire.
The framed opening is 65-9/16" wide, 61" high and 24" deep, and the fireplace itself is 67" wide, 62-5/8" high and 24" deep. Keep 1" of clearance at the back and sides, 52" from the opening to the ceiling and 36" clear in front. The non-combustible board ships with the fireplace, and finishing materials around it must withstand 190 F. Mantel clearance depends on the mantel's depth and is charted in Figure 10.11 on page 50 of the installation manual. It takes a 1/2" gas line and an unswitched 110-120 VAC circuit.
The two Marquis II sizes share the seven ceramic fiber split logs, IntelliFire Touch ignition, RC400 remote, LED lighting and 8" top vent. The 42" runs 54,500 BTU/hr on natural gas and frames 65-9/16" wide, from $6,839. The 36" runs 44,000 BTU/hr and frames 59-1/2" wide, from $6,159.
It vents off the top only, on Majestic 8" DVP direct vent pipe, out through a wall or up through the roof. Straight up it runs from 2 ft to 50 ft. Through a wall, a one-elbow layout reaches 40 ft horizontal at 20 ft of rise and 60 ft in total, and a two-elbow layout reaches 20 ft horizontal. It needs 24" of vertical pipe before the first elbow on natural gas and 36" on propane, and 36" on either fuel in a two-elbow wall layout. It is also approved for the PVLP-SLP, PVI-SLP-B and PVV-SLP power vents with the wire harness. Our team builds the vent package for your run; the approved parts are on pages 65 to 70 of the installation manual and the termination clearances on pages 17 and 18.
The IFT-RC400 touchscreen remote comes with it, already paired, and sets flame height, thermostat mode, timer and lights. The IFT-RC150 wireless wall switch and the IFT-WFM Wi-Fi module for the IntelliFire app are optional. Battery backup keeps it lighting in a power outage, though lights and fans do not run on battery. It shuts itself off after 9 hours with no command, except in active thermostat mode. A wired wall switch is not available with a power vent.
Yes, with an optional kit. The Heat-Zone Gas kit sends heat to another room through 20 ft of 6" round duct, and the Heat-Out Gas kit sends it outside through 25 ft of 6" round duct. Plan it before the fireplace goes in, because the side knockouts are prepared first. One kit runs from the remote, and a second is recommended to be wired through the junction box. The Heat-Zone kit needs Wire Plug Assembly 26D0619 to run from the RC400.
A mantel can go above it, and how close depends on its depth: combustible mantels are charted in Figure 10.11 and non-combustible mantels in Figure 10.12 on page 50 of the installation manual, with mantel legs and wall projections on page 49. For a TV above a mantel, Majestic publishes good faith guidelines in Figure 3.5 on page 10 of the owner's manual: 21-13/16" from the top of the opening to the top of the non-combustible board, the TV 2" to 3" above the mantel, and the mantel 2-1/2" past the TV. Always stay within your TV maker's own temperature limits.
Inside a framed wall, with 1" of clearance at the back and sides, 52" from the opening to the ceiling and 36" clear in front. Adhesive vinyl flooring is not recommended. It is certified for bedrooms and bedsitting rooms, and may be installed as an OEM installation in a manufactured or mobile home. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.
On natural gas or propane it takes a 1/2" gas line to the shut-off valve and flex connector that come with it, plus an unswitched 110-120 VAC circuit wired with 14-2 AWG with ground to the junction box. Inlet pressure is 5" to 10" w.c. on natural gas and 11" to 13" w.c. on propane. Choosing Propane above adds the LPKMARQ42 conversion kit, installed by a qualified service technician.
No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas fireplace the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners, logs and metal or fiber refractory 10 years on parts and 1 on labor, electrical components and cement or glass interior panels 2 years, and all other parts 1 year. We will help you with any claim.