Majestic Meridian Modern 36" Direct Vent Gas Fireplace
What's Included?
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
The Majestic Meridian Modern 36" is a direct vent gas fireplace with IntelliFire Touch electronic ignition and battery backup: up to 34,000 BTU/hr on natural gas, a 34-1/4" x 24-3/4" ceramic glass opening, two-sided black glass interior panels, a 42" wide, 40-1/8" high and 22" deep framed opening and a top vent, from $4,269. A decorative front and a bed of crushed glass embers complete it.
Choose the Meridian Modern 36" if you want a contemporary fire on a bed of glass embers: four colors of crushed glass, black glass panels you can set reflective or matte, and an optional Driftwood log set or natural stones. With only 1/2" of clearance at the back and sides and no raised hearth, it frames tightly into a wall, and it is certified for bedrooms and approved for protected outdoor rooms and patios.
It is not right for you if you prefer a traditional brick firebox. The Meridian Modern 36" surrounds its fire with two-sided black glass panels, set reflective or matte.
The framed opening is 42" wide, 40-1/8" high and 22" deep, and the fireplace itself is 41" wide, 40-7/8" high and 21-7/16" deep and weighs 160 lb. Keep 1/2" of clearance at the back and sides and 32" from the top of the opening to the ceiling, and no raised hearth is needed. A non-combustible board is factory-installed above the opening, and only non-combustible material may cover the metal front of the fireplace; facing up to 1/2" thick at the top and sides may be combustible. Mantel clearance depends on the mantel's depth and is charted in Figure 10.4 on page 60 of the installation manual, with a separate chart in Figure 10.5 for the Passive Heat Kit. It takes a 1/2" gas line and an unswitched 110-120 VAC circuit.
The two Meridian Modern sizes share the two-sided black glass panels, IntelliFire Touch ignition, the same four front styles and the top vent. The 36" runs 34,000 BTU/hr with a 34-1/4" x 24-3/4" glass opening and frames 42" wide; the 42" runs 36,000 BTU/hr with a 41-1/4" x 26-11/16" glass opening and frames 49" wide. This 36" is from $4,269 and the 42" is from $4,799.
It vents off the top on DVP direct vent pipe, or on SLP pipe with an adapter, out through a wall or up through the roof. Straight up, it runs from 3 ft to 40 ft. Through a wall, it runs up to 20 ft horizontal and 40 ft of combined run, with up to three 90 degree elbows, and how far it can go sideways depends on the vertical rise before the first elbow, charted from page 32 of the installation manual. A wall termination with a 90 degree elbow directly off the minimum 6" vertical and the minimum vent run requires a termination cap with the effective length of the DVP-TRAP1 (Figure 3.9 in the installation manual). The PVV-SLP, PVLP-SLP and PVI-SLP-B power vents are listed as approved. Our team builds the vent package for your run; the approved parts are on page 75 of the installation manual and the termination clearances on pages 26 to 28.
It takes two 5 lb bags of crushed glass, and choosing a color above adds all two. Colors can be mixed, and the glass goes in one thin, even layer on the base pan. The Driftwood log set and natural stones (3 bags) are optional, and both go in with the crushed glass, not in place of it.
A remote is optional, and battery backup keeps it lighting in a power outage, though a fan and lights do not run on battery. To adjust the flame height you need the IFT-RC400 remote or the IFT-WFM Wi-Fi module. The Wi-Fi module also needs an IFT-RC400 or IFT-RC150 for thermostat control, and the IFT-ACM module when a fan or power vent is added without an IFT-RC400.
Yes, with planning. Without passive heat, Majestic's good faith guideline is 20" from the top of the opening to the bottom of the TV, with a mantel below it (see page 8 of the installation manual). The optional Passive Heat Kit moves heat out through a discharge opening, and with no fan installed no mantel is needed: 12" from the opening to the bottom of the TV and 4" from the top of the TV to the discharge opening (see page 9). If a fan is added with the Passive Heat Kit, the good faith guideline calls for a mantel below the TV. The kit goes in with the fireplace. Always stay within your TV maker's own temperature limits.
Inside a framed wall, with 1/2" of clearance at the back and sides, 32" from the top of the opening to the ceiling and 36" clear in front. It can sit directly on a wood or metal floor, but not on carpet or vinyl, and needs no raised hearth. It is certified for bedrooms and bedsitting rooms, may be installed as an OEM installation in a manufactured or mobile home, and is approved for protected outdoor locations such as outdoor rooms and patios when kept from direct water. Adhesive vinyl flooring is not recommended. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.
It runs on natural gas; propane is not available for this fireplace. It takes a 1/2" gas line to the shut-off valve and flex connector that come with it, at 5" to 10" w.c. inlet pressure, plus an unswitched 110-120 VAC circuit wired with 14-2 AWG with ground to the junction box.
No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas fireplace the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners and metal or fiber refractory 10 years on parts and 1 on labor, electrical components and glass liner panels 2 years, and all other parts 1 year. We will help you with any claim.