Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by Majestic Authorized Dealer

Majestic Meridian Platinum 42" Direct Vent Gas Fireplace

SKU TMR42XN
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
Up to 45,000 BTU/hr on natural gas or 44,000 on propane
IntelliFire Touch electronic ignition
IFT-RC400 touchscreen remote
Battery backup (four AA batteries, not included)
GFK-160 variable speed fan
LED illuminated embers
LED accent lighting
Ceramic glass
Fiber burner top, stone media and ember material
Non-combustible board, manual gas shut-off valve and flexible connector
🔧 Options
Above the Cart (select from dropdown)
Fuel Type: Natural Gas or Propane
Log Set: Oak Log Set, Birch Log Set, or No Thanks
Interior Panel: Tavern Brown traditional or herringbone brick, Tranquil Greige herringbone brick, Castle Stone, black glass, or No Thanks
Front: 8 options, or No Thanks
Below the Cart (select from optional accessories section)
Wall Switch, Wi-Fi Module and Battery Backup, Heat Management
⚠️ Required to Complete Installation
Front - a decorative front with a built-in mesh barrier screen.
Log Set - an Oak or Birch log set.
Interior Panel - the brick or black glass liner for the firebox.
Venting - 8" DVP direct vent pipe and a wall or roof termination sized for your run (see pg 78 in the installation manual).
Electrical - an unswitched 110-120 VAC circuit.
Gas Line - a 1/2" gas line to the shut-off valve.
Original price $4,999.00 - Original price $7,157.00
Original price
$4,999.00
$4,999.00 - $7,157.00
Current price $4,999.00

About This Product

Majestic Meridian Platinum 42" Direct Vent Gas Fireplace

The Majestic Meridian Platinum 42" is a direct vent gas fireplace that comes with an IFT-RC400 touchscreen remote, a GFK-160 variable speed fan, LED illuminated embers and LED accent lighting: up to 45,000 BTU/hr on natural gas or 44,000 on propane, IntelliFire Touch electronic ignition with battery backup, a 49" wide, 42-1/8" high and 22" deep rough opening, and top or rear venting on 8" DVP pipe, from $4,999. You finish it with a log set, an interior panel and a front.

Choose the Meridian Platinum 42" if you want the remote, fan and lighting in the box and the look left up to you: Oak or Birch logs, four brick interior panels or 2-sided black glass, and five front styles from a simple inside fit to the arched Manor. With 1/2" of clearance at the back and sides and no raised hearth, it frames tightly into a wall, and it is certified for bedrooms.

It is not right for you if you are looking for a modern flame over a bed of decorative media instead of logs. The Meridian Platinum 42" burns behind a full log set, Oak or Birch, over LED illuminated embers.

Specifications

The rough opening is 49" wide, 42-1/8" high and 22" deep, plus 12" of depth if you rear vent with one elbow, and the fireplace itself is 48-1/16" wide, 42-7/8" high and 21-7/16" deep. Keep 1/2" of clearance at the back and sides and 32" from the top of the opening to the ceiling, and no raised hearth is needed. The non-combustible board is factory-installed. Mantel clearance depends on the mantel's depth and is charted in Figure 10.4 on page 63 of the installation manual, with a separate chart in Figure 10.5 for the Passive Heat Kit. It takes a 1/2" gas line and an unswitched 110-120 VAC circuit.

How the Meridian Platinum 42" compares to the 36"

The two sizes share the remote, fan, LED lighting, IntelliFire Touch ignition, the front styles and the 8" DVP vent. The 36" runs up to 40,000 BTU/hr on natural gas and frames 42" wide by 40-1/8" high; the 42" runs up to 45,000 BTU/hr and frames 49" wide by 42-1/8" high. This 42" is from $4,999 and the 36" is from $4,319.

Features

  • IFT-RC400 touchscreen remote and a GFK-160 variable speed fan come with it
  • LED illuminated embers and LED accent lighting, each dimmed from the remote
  • Up to 45,000 BTU/hr on natural gas or 44,000 on propane
  • IntelliFire Touch electronic ignition with battery backup for power outages
  • Certified for bedrooms and bedsitting rooms, and approved for covered outdoor rooms
  • Three heat management options: Heat-Zone, Heat-Out and Passive Heat

Answers to common questions

What venting does the Meridian Platinum 42" need?

It vents off the top or the rear on 8" DVP direct vent pipe, out through a wall or up through the roof. Off the top it runs up to 40 ft straight up, with at least 3 ft of it, and up to 20 ft horizontal within a 40 ft combined run; a vertical termination with two elbows reaches 50 ft combined. Off the rear, a straight run to a wall is limited to 12" of horizontal. Up to three 90 degree elbows are allowed. It can adapt to SLP pipe with a DVP-2SL or DVP-SLP24 adapter, and it is approved for the PVLP-SLP low profile and PVV-SLP vertical power vents and the Power Vent Inline, with the wire harness. Our team builds the vent package for your run; the approved parts are on page 78 of the installation manual and the termination clearances on pages 25 to 27.

What’s included, what’s required, and what’s optional?
  • Included in the box: Up to 45,000 BTU/hr on natural gas or 44,000 on propane; IntelliFire Touch electronic ignition; IFT-RC400 touchscreen remote; Battery backup (four AA batteries, not included); GFK-160 variable speed fan; LED illuminated embers; LED accent lighting; Ceramic glass; Fiber burner top, stone media and ember material; Non-combustible board, manual gas shut-off valve and flexible connector.
  • Required to complete the installation, purchased separately: Front - a decorative front with a built-in mesh barrier screen; choose one in the Front selector on this page; Log Set - an Oak or Birch log set; Interior Panel - the brick or black glass liner for the firebox; Venting - 8" DVP direct vent pipe and a wall or roof termination sized for your run (see pg 78 in the installation manual); Electrical - an unswitched 110-120 VAC circuit; Gas Line - a 1/2" gas line to the shut-off valve.
  • Optional: A wireless wall switch, a Wi-Fi module, a battery backup wall switch kit and heat management; the fireplace operates without any of them.
Which log set and interior panel should I choose?

Both are required, and both are chosen above. Logs come in Oak or Birch. Interior panels come in Tavern Brown brick in a traditional or herringbone pattern, Tranquil Greige herringbone brick, Castle Stone, or a 2-sided black glass liner with a reflective side and a matte side. The LED accent lights are not used with the black glass liner, which comes with covers for them. Choose No Thanks only if you already have that part.

Which fronts fit, and do I need one?

Yes. A front is required, and its mesh barrier screen is built in, so it is what sits between the room and the hot glass. Essence and Essence ClearVue are inside fit fronts in black, which sit inside the opening. Ventura in black or new bronze, Manor arched in black or new bronze, and Ensemble with gun metal or new bronze trim are overlap fronts, which sit on top of your finished wall. Manor, Ensemble and Essence ClearVue use ClearVue mesh.

Can I mount a TV above it?

Yes, with planning. Majestic's good faith TV guidelines are written for the optional Passive Heat Kit, which goes in with the fireplace. Because this fireplace ships with a fan, a mantel is required: 12" from the opening to the bottom of the TV, the mantel 5-1/4" to 6-1/4" below the TV and 3" past the front of it, and 4" from the top of the TV to the discharge opening (Figure 2.3 on page 7 of the installation manual). Always stay within your TV maker's own temperature limits.

Where can it be installed?

Inside a framed wall, with 1/2" of clearance at the back and sides, 32" from the top of the opening to the ceiling and 36" clear in front. It can sit directly on a wood or metal floor, but not on carpet or vinyl, and needs no raised hearth. It is certified for bedrooms and bedsitting rooms, may be installed as an OEM installation in a manufactured or mobile home, and is approved for covered outdoor rooms, patios and decks when protected from direct water. With vinyl flooring run to the wall, a 12" x 12" hearth, 30" of clearance in front or raising the base 24" off the floor is recommended. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.

What gas and electrical connections does it need?

It takes a 1/2" gas line to the shut-off valve and flexible connector that come with it, plus an unswitched 110-120 VAC circuit wired with at least 14-2 AWG with ground. Inlet pressure is 5" to 10" w.c. on natural gas and 11" to 13" w.c. on propane. Natural gas and propane are separate models at the same price, so choose your fuel above. Battery backup keeps it lighting in a power outage, though the fan and lights do not run on battery.

Does buying from The Torch Guys affect my Majestic warranty?

No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas fireplace the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners, logs and metal or fiber refractory 10 years on parts and 1 on labor, vented burners and logs 5 years, electrical components, cement refractory panels and glass liner panels 2 years, and all other parts 1 year. We will help you with any claim.

  • Model TMR42XN (natural gas) / TMR42XL (propane); replaces MER42PN / MER42PL
  • Fuel Type Natural Gas or Propane (choose above)
  • Venting Type Direct vent, 8 in. DVP, top or rear vent
  • Ignition Type IntelliFire Touch intermittent pilot, with battery backup
  • BTU (Natural Gas) 45,000 BTU/hr high / 23,000 low
  • BTU (Propane) 44,000 BTU/hr high / 23,000 low
  • Unit Width 48-1/16"
  • Unit Height 42-7/8"
  • Unit Depth 21-7/16"
  • Framing Width 49"
  • Framing Height 42-1/8"
  • Framing Depth 22"
  • Clearance (Sides) 1/2"
  • Clearance (Back) 1/2"
  • Hearth Requirement None required

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.