Majestic Quartz Platinum 36" Direct Vent Gas Fireplace
What's Included?
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
The Majestic Quartz Platinum 36" is a direct vent gas fireplace that comes with an IFT-RC400 touchscreen remote, a variable speed fan and LED illuminated embers: up to 30,500 BTU/hr on natural gas or 29,500 on propane, IntelliFire Touch electronic ignition with battery backup, a 32-1/16" by 21-1/2" viewing area behind ceramic glass, a 42" wide, 38-1/4" high and 16-1/4" deep rough opening, and top or rear venting, from $3,369. You finish it with a log set, an interior panel and a front.
Choose the Quartz Platinum 36" if you want the remote, the fan and a lit ember bed in the box, in a fireplace built for a shallow wall: at 16-1/4" of framing depth, with 1/2" of clearance at the back and sides and no raised hearth, it fits where a deeper fireplace will not. Pick Oak or Birch logs, Tavern Brown brick or reflective black glass interior panels, and a Contemporary Rectangular Door or Decorative Mesh front. It is certified for bedrooms.
It is not right for you if you are planning around a deep, full-depth firebox. The Quartz Platinum 36" is built shallow, framing into just 16-1/4" of depth so it fits walls where a deeper fireplace will not.
The rough opening is 42" wide, 38-1/4" high and 16-1/4" deep, plus 12" of depth if you rear vent with one elbow, and the fireplace itself is 41" wide, 37-7/8" high and 16-1/4" deep. Keep 1/2" of clearance at the back and sides and 32" from the top of the opening to the ceiling, and no raised hearth is needed. The non-combustible board is factory-installed. Mantel clearance depends on the mantel's depth and is charted in Figure 10.3 on page 55 of the installation manual. It takes a 1/2" gas line and an unswitched 110-120 VAC circuit.
All three Quartz Platinum sizes share the IFT-RC400 remote, the variable speed fan, LED illuminated embers, IntelliFire Touch ignition, the two front styles, Oak or Birch logs and top or rear venting. The 32" runs up to 27,500 BTU/hr on natural gas and frames 37" wide by 34-3/4" high, the 36" up to 30,500 BTU/hr and 42" by 38-1/4", and the 42" up to 35,000 BTU/hr and 49" by 40-1/4". This 36" is from $3,369, the 32" is from $2,939 and the 42" is from $3,749. The standard Quartz 36" is from $2,089 and does not include the remote, fan, LED embers or ceramic glass.
Off the top it uses SLP pipe, which runs up to 60 ft straight up; with elbows the combined run reaches 40 ft, with up to 15 ft of horizontal on a single elbow to a wall or two elbows to the roof, and up to 14 ft with more elbows. Off the rear it uses DVP pipe; a straight run to a wall is limited to 24", and with elbows it reaches 40 ft combined with up to 14 ft of horizontal to a wall or 7-1/2 ft on a single elbow to the roof. SLP-FLEX pipe cuts the horizontal allowance by 25%. It is approved for the PVLP-SLP, PVI-SLP-B and PVV-SLP power vents with the wire harness, and for an existing non-combustible chimney with the DV-46DVA-GCL adapter and LINK-DV30B liner kit. Our team builds the vent package for your run; the approved parts are on page 65 of the installation manual and the termination clearances on pages 16 to 18.
All three are required. Logs come in Oak or Birch, and interior panels in Tavern Brown brick or reflective black glass; both are chosen above. The front is chosen in the Front selector: the Contemporary Rectangular Door comes in black or new bronze, and Decorative Mesh is an inside fit front in black. Each has its mesh barrier screen built in. Choose No Thanks only if you already have that part.
It comes with the IFT-RC400 touchscreen remote, which runs on and off, flame height, the fan, the thermostat, the LED embers and the cold climate feature. You can add an IFT-RC150 wireless wall switch or run it from a wired wall switch, and set to ON at the control module it runs at the high flame setting with no adjustment. An IFT-WFM Wi-Fi module adds the IntelliFire app, and a BATTERY-WSK kit adds a battery backup wall switch.
Inside a framed wall, with 1/2" of clearance at the back and sides, 32" from the top of the opening to the ceiling and 36" clear in front. It can sit on a combustible floor on a hard metal or wood surface with no raised hearth. It is certified for bedrooms and bedsitting rooms and may be installed as an OEM installation in a manufactured or mobile home. Combustible mantel clearance is charted in Figure 10.3 on page 55 of the installation manual, and good faith guidelines for a TV above the fireplace, with a mantel between them, are in Figure 2.2 on page 7; stay within your TV maker's own temperature limits. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.
It takes a 1/2" gas line to the shut-off valve and flexible connector that come with it, plus an unswitched 110-120 VAC circuit wired with at least 14-2 AWG with ground. Inlet pressure is 5" to 10" w.c. on natural gas and 11" to 13" w.c. on propane. Natural gas and propane are separate models at the same price, so choose your fuel above. Battery backup keeps it lighting in a power outage, though the fan and lights do not run on battery.
No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas fireplace the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners, logs and metal or fiber refractory 10 years on parts and 1 on labor, vented burners and logs 5 years, electrical components, cement refractory panels and glass liner panels 2 years, and all other parts 1 year. We will help you with any claim.