Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by Majestic Authorized Dealer

Majestic Quartz 42" Direct Vent Gas Fireplace

SKU TBSC42N
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
Up to 30,000 BTU/hr on natural gas or propane
IntelliFire Touch electronic ignition
Battery backup (four AA batteries, not included)
Tempered glass
39-1/16" by 23-9/16" viewing area
Glowing embers
12 ft control wire and junction box
Non-combustible board, manual gas shut-off valve and flexible connector
🔧 Options
Above the Cart (select from dropdown)
Fuel Type: Natural Gas or Propane
Front: Contemporary Rectangular Door - Black, Contemporary Rectangular Door - New Bronze, Decorative Mesh Inside Fit - Black, or No Thanks
Log Set: Oak Log Set, Birch Log Set, or No Thanks
Below the Cart (select from optional accessories section)
Interior Panels, Remote Controls and Wall Switches, Heat Management, Fan Kit
⚠️ Required to Complete Installation
Front - a decorative front with a built-in mesh barrier screen.
Log Set - Oak or Birch logs.
Venting - SLP pipe off the top or DVP pipe off the rear, and a wall or roof termination sized for your run (see pg 60 in the installation manual).
Electrical - an unswitched 110-120 VAC circuit.
Gas Line - a 1/2" gas line to the shut-off valve.
Original price $2,329.00 - Original price $3,967.00
Original price
$2,329.00
$2,329.00 - $3,967.00
Current price $2,329.00

About This Product

Majestic Quartz 42" Direct Vent Gas Fireplace

The Majestic Quartz 42" is a direct vent gas fireplace that frames into just 16-1/4" of depth: up to 30,000 BTU/hr on natural gas or propane, IntelliFire Touch electronic ignition with battery backup, a 39-1/16" by 23-9/16" viewing area behind tempered glass, a 49" wide by 40-1/4" high rough opening, and top or rear venting, from $2,329. You finish it with a front and a log set.

Choose the Quartz 42" if you want a log fire in a shallow wall: at 16-1/4" of framing depth, with 1/2" of clearance at the back and sides and no raised hearth, it fits where a deeper fireplace will not. Pick an overlap or inside fit front and Oak or Birch logs, add Tavern Brown brick or reflective black glass interior panels if you like, and it is certified for bedrooms.

It is not right for you if you are planning around a deep, full-depth firebox. The Quartz 42" is built shallow, framing into just 16-1/4" of depth so it fits walls where a deeper fireplace will not.

Specifications

The rough opening is 49" wide, 40-1/4" high and 16-1/4" deep, plus 12" of depth if you rear vent with one elbow, and the fireplace itself is 48" wide, 39-7/8" high and 16-5/16" deep. Keep 1/2" of clearance at the back and sides and 32" from the top of the opening to the ceiling, and no raised hearth is needed. The non-combustible board is factory-installed. Mantel clearance depends on the mantel's depth and is charted in Figure 10.3 on page 56 of the installation manual. It takes a 1/2" gas line and an unswitched 110-120 VAC circuit.

How the Quartz 42" compares to the other sizes

All three Quartz sizes share IntelliFire Touch ignition, the two front styles, Oak or Birch logs and top or rear venting. The 32" runs up to 21,000 BTU/hr on natural gas and frames 37" wide by 34-3/4" high, the 36" up to 25,000 BTU/hr and 42" by 38-1/4", and the 42" up to 30,000 BTU/hr and 49" by 40-1/4". This 42" is from $2,329, the 32" is from $1,699 and the 36" is from $2,089. Quartz Platinum adds a touchscreen remote, a variable speed fan, LED illuminated embers and clear ceramic glass.

Features

  • Frames into just 16-1/4" of depth with 1/2" of clearance at the back and sides
  • Up to 30,000 BTU/hr on natural gas or propane
  • IntelliFire Touch electronic ignition with battery backup for power outages
  • A 39-1/16" by 23-9/16" viewing area behind tempered glass, with glowing embers
  • Your choice of an overlap or inside fit front, and Oak or Birch logs
  • Certified for bedrooms and bedsitting rooms

Answers to common questions

What venting does the Quartz 42" need?

Off the top it uses SLP pipe, which runs up to 60 ft straight up; with elbows the combined run reaches 40 ft, with up to 14 ft of horizontal to a wall or 15 ft on a roof termination, and up to four 90 degree elbows. Off the rear it uses DVP pipe; a straight run to a wall is limited to 18", or 24" only without the brick interior panels, and with elbows it reaches 40 ft combined with up to 14 ft of horizontal, using up to three 90 degree elbows. SLP-FLEX pipe cuts the horizontal allowance by 25%. It is approved for the PVLP-SLP, PVI-SLP-B and PVV-SLP power vents with the wire harness. Our team builds the vent package for your run; the approved parts are on page 60 of the installation manual and the termination clearances on pages 15 to 17.

What’s included, what’s required, and what’s optional?
  • Included in the box: Up to 30,000 BTU/hr on natural gas or propane; IntelliFire Touch electronic ignition; Battery backup (four AA batteries, not included); Tempered glass; 39-1/16" by 23-9/16" viewing area; Glowing embers; 12 ft control wire and junction box; Non-combustible board, manual gas shut-off valve and flexible connector.
  • Required to complete the installation, purchased separately: Front - a decorative front with a built-in mesh barrier screen; Log Set - Oak or Birch logs; Venting - SLP pipe off the top or DVP pipe off the rear, and a wall or roof termination sized for your run (see pg 60 in the installation manual); Electrical - an unswitched 110-120 VAC circuit; Gas Line - a 1/2" gas line to the shut-off valve.
  • Optional: Interior panels, a remote or wall switch, a Wi-Fi module, a fan kit, heat management; the fireplace operates without any of them, with its standard matte black interior.
Which front, logs and interior should I pick?

A front and a log set are both required, and both are chosen above. The Contemporary Rectangular Door is an overlap front in black or new bronze, and Decorative Mesh is an inside fit front in black; each has its mesh barrier screen built in. Logs come in Oak or Birch. The interior is matte black as standard, and Tavern Brown brick or reflective black glass interior panels are optional. Choose No Thanks only if you already have that part.

How is it controlled, and do I need a remote?

It does not need one. It may be run from a wired wall switch, the IFT-RC150 wireless wall switch or the IFT-RC400 touchscreen remote, and flame height adjusts from the remote. Set to ON at the control module it runs at the high flame setting with no adjustment. An IFT-WFM Wi-Fi module adds the IntelliFire app, and a BATTERY-WSK kit adds a battery backup wall switch.

Where can it be installed, and what about a mantel or a TV above it?

Inside a framed wall, with 1/2" of clearance at the back and sides, 32" from the top of the opening to the ceiling and 36" clear in front. It can sit on a combustible floor on a hard metal or wood surface with no raised hearth. It is certified for bedrooms and bedsitting rooms and may be installed as an OEM installation in a manufactured or mobile home. Combustible mantel clearance is charted in Figure 10.3 on page 56 of the installation manual, and good faith guidelines for a TV above the fireplace, with a mantel between them, are in Figure 3.4 on page 9 of the owner's manual; stay within your TV maker's own temperature limits. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.

What gas and electrical connections does it need?

It takes a 1/2" gas line to the shut-off valve and flexible connector that come with it, plus an unswitched 110-120 VAC circuit wired with at least 14-2 AWG with ground. Inlet pressure is 5" to 10" w.c. on natural gas and 11" to 13" w.c. on propane. Natural gas and propane are separate models at the same price, so choose your fuel above. Battery backup keeps it lighting in a power outage, though the fan and lights do not run on battery.

Does buying from The Torch Guys affect my Majestic warranty?

No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas fireplace the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners, logs and metal or fiber refractory 10 years on parts and 1 on labor, vented burners and logs 5 years, electrical components, cement refractory panels and glass liner panels 2 years, and all other parts 1 year. We will help you with any claim.

  • Model TBSC42N (natural gas) / TBSC42L (propane); replaces QUARTZ42IFTN / QUARTZ42IFTL
  • Fuel Type Natural Gas or Propane (choose above)
  • Venting Type Direct vent, 4 in. x 6-5/8 in. SLP off the top or 5 in. x 8 in. DVP off the rear
  • Ignition Type IntelliFire Touch intermittent pilot, with battery backup
  • BTU (Natural Gas) 30,000 BTU/hr high / 15,500 low
  • BTU (Propane) 30,000 BTU/hr high / 14,500 low
  • Efficiency 57.1% (natural gas) / 57% (propane), EnerGuide CSA P.4.1-15
  • Viewing Area 39-1/16" W x 23-9/16" H
  • Unit Width 48"
  • Unit Height 39-7/8"
  • Unit Depth 16-5/16"
  • Framing Width 49"
  • Framing Height 40-1/4"
  • Framing Depth 16-1/4"
  • Clearance (Sides) 1/2"

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.