Majestic Ruby 30" Freestanding Direct Vent Gas Fireplace
What's Included?
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.
The Majestic Ruby 30" Freestanding Direct Vent Gas Fireplace sets the Ruby 30" gas insert in a steel cabinet on a pedestal base, with 8 hand-painted ceramic fiber split logs over glowing embers. It stands on the floor with no hearth pad, vents vertically through the roof or up an existing chimney, runs up to 32,700 BTU/hr on natural gas and 32,000 on propane, shows a 27-1/2" x 15-15/16" ceramic glass view, and comes with the IFT-RC400 touchscreen remote and a factory installed fan, from $3,109.
Choose the Ruby 30" Freestanding if you want a log fire in a room that has no fireplace. It is 33" wide and 19-3/8" deep, the remote and the fan come with it, and you pick natural gas or propane, then any interior panels, an accent light kit or a Wi-Fi module.
It is not right for you if you want a fireplace built flush into a wall. The Ruby 30" Freestanding stands in its own steel cabinet on a pedestal base, so it can sit on carpet with no hearth pad.
The fireplace is 33" wide, 34" high to the top of the cabinet (35-5/8" to the top of the vent collar) and 19-3/8" deep. Clearances to walls, including alcoves, are charted in Figure 3.2 on page 8 of the cabinet kit manual, and corner installations in Figure 3.3 on page 9. It takes a 1/2" gas line and an unswitched 110-120 VAC outlet.
Both are built on the same Ruby 30" insert, with the same logs, remote, fan and output: up to 32,700 BTU/hr on natural gas and 32,000 on propane. The freestanding version stands in its own cabinet and vents vertically through the roof or up a chimney; the insert goes into an existing wood-burning fireplace with a surround and a choice of fronts. This freestanding fireplace is from $3,109 and the insert is from $3,109.
It is a top-vent direct vent fireplace that terminates vertically only; horizontal termination is not allowed. It runs on SLP, DuraVent or ICC direct vent pipe through the roof, or up a Class A or masonry chimney with an approved adapter, with 10 ft to 40 ft of vertical pipe on a straight run. Up to three 90 degree elbows may be used, at least 4 ft of vertical comes off the top before any horizontal run, and horizontal runs are short (2 ft at 10 ft of rise); the tables are on pages 13 to 16 of the cabinet kit manual. An SLP starting collar comes with it; DuraVent takes the STOVEDV-BK collar and ICC the STOVEICC-BK adapter. It needs its own vent. Our team builds the vent package for your home.
Yes. This fireplace is the Ruby 30" insert set into the CK-30 steel cabinet, and the cabinet kit is built for the Inside Fit front and the ADP-CK30 adapter kit, which fits on top of the insert to take the vent pipe and adds an on/off switch in the back of the cabinet. The front carries the barrier that keeps hands off the hot glass. All three ship separately, so add them to your order unless you already have them.
It needs no non-combustible hearth pad and may stand on carpet or combustible flooring, on a floor that is stable, level and strong enough to hold it; with vinyl flooring a 12 in. deep hearth extension is recommended. Clearances to walls and alcoves are charted in Figure 3.2 on page 8 of the cabinet kit manual, and corner installations in Figure 3.3 on page 9. It may be installed as an OEM installation in a manufactured or mobile home, with the cabinet screwed to the floor. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.
A 1/2" gas line to the shut-off valve and flexible connector that come with it, at 5" to 10" w.c. on natural gas or 11" to 13" w.c. on propane, plus an unswitched, grounded 110-120 VAC outlet for the supplied cord. For power outages the insert's battery pack, with four AA batteries, runs it for up to 72 hours through a USB-C plug. On this freestanding build the USB-C plug and bracket, part 2532-301, is ordered separately, so ask us to add it.
No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas fireplace the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners, logs and metal or fiber refractory 10 years on parts and 1 on labor, electrical components and glass liner panels 2 years, and all other parts 1 year. We will help you with any claim.