Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by Majestic Authorized Dealer

Majestic See Through 36" Direct Vent Multi Sided Gas Fireplace

SKU ST-DV36IN
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
Up to 38,000 BTU/hr on natural gas or 35,500 on propane
IntelliFire Touch electronic ignition
Battery backup
7 ceramic fiber logs
Glowing embers and lava rock
Black steel interior
Tempered glass on both faces
Factory-installed non-combustible board, junction box, gas shut-off valve and flex connector
🔧 Options
Above the Cart (select from dropdown)
Fuel Type: Natural Gas or Propane
Front: Black Firescreen Front or No Thanks
Interior Panel: Black Metal (Standard), Weathered Traditional Brick, or Reflective Black Glass
Below the Cart (select from optional accessories section)
Remote Controls and Wall Switches, IntelliFire Touch Wireless Wall Switch - IFT-RC150-HTL, Fan Kit
⚠️ Required to Complete Installation
Front - two firescreen fronts, one for each face, each with a built-in barrier.
Venting - DVP or SLP direct vent pipe and a wall or roof termination sized for your run (see pg 66 in the installation manual).
Electrical - an unswitched 110-120 VAC circuit to the junction box.
Gas Line - a gas line to the 1/2" shut-off valve.
Original price $4,989.00 - Original price $6,530.00
Original price
$4,989.00
$4,989.00 - $6,530.00
Current price $4,989.00

About This Product

Majestic See Through 36" Direct Vent Multi Sided Gas Fireplace

The Majestic See Through 36" is a direct vent gas fireplace with glass on both faces, built into a wall between two spaces: up to 38,000 BTU/hr on natural gas or 35,500 on propane, 7 ceramic fiber logs over glowing embers and lava rock, IntelliFire Touch electronic ignition with battery backup, a 43" wide, 38-1/8" high and 23" deep framed opening, and venting off the top or the rear, from $4,989. It takes two firescreen fronts.

Choose the See Through if you want one fire seen from two rooms, with the look of a traditional log fire: 7 ceramic fiber logs on glowing embers and lava rock. The interior comes in black steel, with weathered traditional brick or reflective black glass panels as upgrades, and it is certified for bedrooms.

It is not right for you if you are looking for a contemporary bed of crushed glass. The See Through sets 7 ceramic fiber logs on glowing embers and lava rock, for a traditional fire you can see from both sides of the wall.

Specifications

The framed opening is 43" wide, 38-1/8" high and 23" deep, adjusted for any interior sheathing, and the fireplace itself is 42-1/2" wide, 38" high and 24" deep. Keep 31" to the ceiling, 1/2" at each end and 36" clear in front of each face. It sits on a combustible floor and needs no hearth extension, on a hard metal or wood surface rather than carpet, vinyl or tile. A non-combustible board comes installed above it. Mantel clearance depends on the mantel's depth and material and is charted in Figure 10.4 on page 57 and Figure 10.6 on page 58 of the installation manual. It takes an unswitched 110-120 VAC circuit and connects to your gas line at a 1/2" shut-off valve.

How the See Through compares to the Pier 36"

The See Through opens on two faces, with a wall at each end, and frames 43" wide, from $4,989, and it takes two fronts. The Pier 36" opens on three sides as a peninsula and frames 40" wide, from $4,899, and it takes two fronts and an end panel. Both run 38,000 BTU/hr on natural gas. Choose the See Through when the fire needs to reach two rooms through one wall.

Features

  • Glass on both faces, built into a wall between two spaces
  • A set of 7 ceramic fiber logs over glowing embers and lava rock
  • Up to 38,000 BTU/hr on natural gas and 35,500 on propane
  • IntelliFire Touch electronic ignition with battery backup for power outages
  • Vents off the top or the rear, on DVP or SLP pipe
  • Certified for bedrooms and bedsitting rooms

Answers to common questions

What venting does the See Through need?

It is a direct vent fireplace on DVP pipe, or SLP pipe with an adapter, and it vents off the top or the rear; that choice is made at installation and cannot be changed later. Straight up off the top, it runs from 3 ft to 60 ft to a roof termination. Out through a wall off the top, horizontal reach depends on the rise before the elbow, up to 18 ft on 6 ft of rise, and the whole run stays within 50 ft. Straight out the rear, the run to the wall cap is 16" at most. It is approved for the PVV-SLP, PVI-SLP-B and PVLP-SLP power vents with a wire harness and an IntelliFire control set. Our team builds the vent package for your run; the parts are on pages 66 to 75 of the installation manual and the diagrams on pages 22 to 34.

What’s included, what’s required, and what’s optional?
  • Included in the box: Up to 38,000 BTU/hr on natural gas or 35,500 on propane; IntelliFire Touch electronic ignition; Battery backup; 7 ceramic fiber logs; Glowing embers and lava rock; Black steel interior; Tempered glass on both faces; Factory-installed non-combustible board, junction box, gas shut-off valve and flex connector.
  • Required to complete the installation, purchased separately: Front - two firescreen fronts, one for each face, each with a built-in barrier; Venting - DVP or SLP direct vent pipe and a wall or roof termination sized for your run (see pg 66 in the installation manual); Electrical - an unswitched 110-120 VAC circuit to the junction box; Gas Line - a gas line to the 1/2" shut-off valve.
  • Optional: A remote or wall switch, a fan kit, a Wi-Fi module and a battery backup wall switch; the fireplace operates without any of them.
Why does it need two fronts?

Because it has glass on both faces, each side takes its own multi side firescreen front, with a built-in barrier that keeps hands off the hot glass. Choosing the black front above adds both. They ship in a separate box, and the fireplace is not run without them.

Can I put a mantel above it?

Yes. Mantel clearance depends on the mantel's depth and material: see Figure 10.4 on page 57 of the installation manual for a combustible mantel and Figure 10.6 on page 58 for a non-combustible one. Mantel legs and wall projections are in Figures 10.7 and 10.8 on page 58, and wall surface temperatures above the opening are charted in Figure 2.1 on page 7. Send us your mantel depth and we'll help.

Where can it be installed?

Indoors, inside a framed wall between two spaces, with 31" to the ceiling, 1/2" at each end and 36" clear in front of each face. It is not designed or approved as an indoor/outdoor fireplace. It sits on a hard metal or wood surface, not directly on carpet, vinyl or tile, and needs no hearth extension. It is certified for bedrooms and bedsitting rooms, and may be installed as an OEM installation in a manufactured or mobile home. Adhesive vinyl flooring is not recommended. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.

What gas and electrical connections does it need?

Your gas line connects at the 1/2" shut-off valve with its flexible connector, and the fireplace needs an unswitched 110-120 VAC circuit to the junction box. Inlet pressure is 5" to 10" w.c. on natural gas and 11" to 13" w.c. on propane. It is built for natural gas, and choosing Propane above adds the conversion kit, which a qualified service technician installs.

Does buying from The Torch Guys affect my Majestic warranty?

No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas fireplace the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners, logs and metal or fiber refractory 10 years on parts and 1 on labor, vented burners and logs 5 years, electrical components and glass liner panels 2 years, and all other parts 1 year. We will help you with any claim.

  • Model ST-DV36IN
  • Series Majestic See Through
  • Fuel Type Natural Gas or Propane (choose above)
  • Venting Type Direct vent, DVP or SLP pipe, top or rear vent
  • Ignition Type IntelliFire Touch intermittent pilot, with battery backup
  • BTU (Natural Gas) 38,000 BTU/hr high / 21,000 low
  • BTU (Propane) 35,500 BTU/hr high / 20,000 low
  • Unit Width 42-1/2"
  • Unit Height 38"
  • Unit Depth 24"
  • Framing Width 43"
  • Framing Height 38-1/8"
  • Framing Depth 23"
  • Clearance (Top) 31"
  • Mobile Home Approved Yes — OEM installation

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.