Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by Majestic Authorized Dealer

Majestic Trilliant 25" Direct Vent Gas Insert

SKU TRILLIANT25IN
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
Up to 27,000 BTU/hr on natural gas and 25,000 on propane
IntelliFire Touch electronic ignition
IFT-RC400 touchscreen remote control
Fan, factory installed
Battery backup with a USB-C port (battery pack for 4 AA batteries, batteries not included)
7-piece oak log set
Glowing embers and mystic embers
Canyon Brown brick interior panels and a decorative brick base
Ceramic glass
Power cord, manual gas shut-off valve and flexible gas connector
🔧 Options
Above the Cart (select from dropdown)
Fuel Type: Natural Gas or Propane
Front: Inside Fit, Clean Screen, Mission Fullview, Tuscan Arch or Forged Arch, or No Thanks
Surround: Small, Medium or Large, or No Thanks
Below the Cart (select from optional accessories section)
Custom Surround, USB-C relocation kit, Wireless Wall Switch, Wi-Fi Module, Interior Panels
⚠️ Required to Complete Installation
Front - a decorative front with a built-in barrier screen.
Surround - fills the space between the insert and your fireplace opening.
Venting - a 3 in. flex liner kit with termination cap, run up your existing chimney (see pg 54 in the installation manual).
Electrical - a 110-120 VAC outlet for the supplied power cord.
Gas Line - a 1/2" gas line to the shut-off valve.
Original price $3,319.00 - Original price $5,257.00
Original price
$3,319.00
$3,319.00 - $5,257.00
Current price $3,319.00

▶️ Product Video

About This Product

Majestic Trilliant 25" Direct Vent Gas Insert

The Majestic Trilliant 25" Direct Vent Gas Insert turns an existing wood-burning fireplace into a remote-started gas fire, with 7 hand-painted oak logs over glowing embers, Canyon Brown brick interior panels. It runs up to 27,000 BTU/hr on natural gas and 25,000 on propane, shows a 22-1/4" x 12-3/16" ceramic glass view, needs a firebox opening of 26-5/8" wide by 17-5/16" high by 15" deep, and comes with the IFT-RC400 touchscreen remote and a factory installed fan, from $3,319.

Choose the Trilliant 25" if you want a classic brick-and-log fire in your old fireplace without hauling wood. The remote, the fan and the battery backup come with it, and you pick the rest: natural gas or propane, then a front and a surround to suit your opening. It is certified for bedrooms and bedsitting rooms.

It is not right for you if you want a stripped-down insert that you build up one option at a time. The Trilliant 25" comes fully featured, with Canyon Brown brick interior panels, hand-painted oak logs and a factory installed fan as standard.

Specifications

The insert is 26-1/8" wide at the front, 17-1/16" high and 14-1/2" deep. It needs a firebox opening of 26-5/8" wide at the front and 15-1/8" at the rear, 17-5/16" high at the front and 15-1/4" at the rear, and 15" deep. All of that assumes 1/4 in. of clearance on all sides; add 4 in. of height if the exhaust collar and the damper do not line up. Mantel legs and wall projections are charted in Figures 3.15 and 3.16 and Tables 1 and 2 on page 18 of the installation manual, and combustible mantels in Figure 3.17 on page 19. It takes a 1/2" gas line and a 110-120 VAC outlet.

How the Trilliant 25" compares to the 30" and 35"

All three sizes share the hand-painted oak logs, the Canyon Brown brick interior, the remote, the fan, the battery backup and the vent system; the 30" and 35" add two accent lights. The 25" runs up to 27,000 BTU/hr on natural gas and 25,000 on propane and needs a 26-5/8" wide by 17-5/16" high opening. The 30" runs up to 32,700 and 32,000 and needs 31-5/8" by 21"; the 35" runs up to 35,000 and 35,000 and needs 36-5/8" by 24-1/4". This 25" is from $3,319, the 30" is from $3,479 and the 35" is from $3,619.

Features

  • 7 hand-painted oak logs over glowing embers, against Canyon Brown brick interior panels
  • IFT-RC400 touchscreen remote with thermostat mode, and a factory installed fan
  • Up to 27,000 BTU/hr on natural gas and 25,000 on propane
  • IntelliFire Touch ignition with a USB-C battery backup for power outages
  • Five front styles and three surround sizes to frame your fireplace opening
  • Direct vent on two 3 in. flex liners, so it draws its air from outside and sends exhaust out the chimney

Answers to common questions

What venting does the Trilliant 25" need?

It vents straight up your existing chimney on two 3 in. flex liners to a vertical termination, with a 10 ft minimum and 50 ft maximum vertical run. Terminating horizontally is not allowed, so it is not a through-the-wall insert. The LINK-DV and LINKSQ kits include the liners, the termination cap and the flashing, and LINK-ZC-ADPB adapts them to Class A pipe in a factory-built fireplace. To extend above the chimney, SLP 6-5/8 in. pipe connects with the DV-46DVA-GK adapter, with up to four 45 degree elbows in that section and no 90 degree elbows. It needs its own vent system, not a flue shared with another appliance. Our team builds the vent package for your chimney; the kits are on page 54 of the installation manual.

What’s included, what’s required, and what’s optional?
  • Included in the box: Up to 27,000 BTU/hr on natural gas and 25,000 on propane; IntelliFire Touch electronic ignition; IFT-RC400 touchscreen remote control; Fan, factory installed; Battery backup with a USB-C port (battery pack for 4 AA batteries, batteries not included); 7-piece oak log set; Glowing embers and mystic embers; Canyon Brown brick interior panels and a decorative brick base; Ceramic glass; Power cord, manual gas shut-off valve and flexible gas connector.
  • Required to complete the installation, purchased separately: Front - a decorative front with a built-in barrier screen; choose one in the Front selector on this page; Surround - fills the space between the insert and your fireplace opening; choose one in the Surround selector on this page; Venting - a 3 in. flex liner kit with termination cap, run up your existing chimney (see pg 54 in the installation manual); Electrical - a 110-120 VAC outlet for the supplied power cord; Gas Line - a 1/2" gas line to the shut-off valve.
  • Optional: A custom surround, a USB-C relocation kit, a wireless wall switch, a Wi-Fi module and reflective black glass interior panels; the insert operates without any of them.
Will the Trilliant 25" fit my fireplace?

It goes into a masonry wood-burning fireplace or a UL127 listed factory-built one with a non-combustible chimney in good working order. With a standard surround your firebox needs to open 26-5/8" wide at the front and 15-1/8" at the rear, 17-5/16" high at the front and 15-1/4" at the rear, and 15" deep. Custom surrounds cover other openings. The old damper is locked open or removed, and once converted that fireplace is for the gas insert only. It can also sit in a zero clearance wall extension (section 3.C on pages 16 and 17 of the installation manual). It is certified for bedrooms and bedsitting rooms, and may be installed as an OEM installation in a manufactured or mobile home. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.

Do I need both a front and a surround?

Yes. The front carries the barrier that keeps hands off the hot glass, and the surround fills the space between the insert and your fireplace opening, with the front mounting onto it. The surround also carries the reset switch and USB-C battery plug the insert needs to run. They ship in separate boxes, so add both to your order unless you already have them. The Inside Fit front is black only and is for an installation that needs a custom surround smaller than a standard overlap front; Clean Screen, Mission Full View and Tuscan Arch come in black or New Bronze, and Forged Arch in black. Surrounds come Small (35" x 23"), Medium (37" x 26"), Large (39" x 28"), each in black or New Bronze. With an Inside Fit front or an on-site surround, a USB-C relocation kit moves the USB-C port and reset switch under the front.

Can I put a mantel or a TV above it?

Mantel legs and wall projections are charted in Figures 3.15 and 3.16 and Tables 1 and 2 on page 18 of the installation manual, and combustible mantels in Figure 3.17 on page 19. Combustible facings do not extend behind the surround. For a TV, Majestic publishes good faith guidelines in Figure 3.4 on page 9 of the owner's manual, with wall surface temperatures in Figure 2.4 on page 7 of the installation manual. They are not a guarantee against your TV maker's temperature limits, so check those too. You can also send us your mantel depth. We're here to help!

What gas and electrical connections does it need?

A 1/2" gas line to the shut-off valve and flexible connector that come with it, plus a 110-120 VAC outlet. The supplied power cord runs about 10 ft 6 in on the left and 8 ft on the right, and plugs into an outlet box in a bottom back corner of the old fireplace or routes out onto the hearth to a nearby outlet. Inlet pressure is 5" to 10" w.c. on natural gas and 11" to 13" w.c. on propane. In a power outage the included battery pack, with four AA batteries, runs it for up to 72 hours through the USB-C port, though the remote will not run the fan on battery.

Does buying from The Torch Guys affect my Majestic warranty?

No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas insert the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners, logs and metal or fiber refractory 10 years on parts and 1 on labor, electrical components, cement refractory panels and glass liner panels 2 years, and all other parts 1 year. We will help you with any claim.

  • Model TRILLIANT25IN (natural gas) / TRILLIANT25IL (propane)
  • Series Majestic Trilliant
  • Fuel Type Natural Gas or Propane (choose above)
  • Venting Type Direct vent, two 3 in. flex liners up the existing chimney, vertical termination
  • Ignition Type IntelliFire Touch intermittent pilot, with battery backup
  • BTU (Natural Gas) 27,000 BTU/hr high / 18,900 low
  • BTU (Propane) 25,000 BTU/hr high / 17,500 low
  • Efficiency 68% natural gas / 66% propane (EnerGuide, CSA P.4.1-15)
  • Viewing Area 22-1/4" W x 12-3/16" H (glass size)
  • Unit Width 26-1/8"
  • Unit Height 17-1/16"
  • Unit Depth 14-1/2"
  • Minimum Fireplace Opening 26-5/8" W x 17-5/16" H (15" deep)
  • Hearth Requirement Flooring and hearth material stay below the bottom of the surround; vinyl guidance in Figure 3.20 of the installation manual
  • Mobile Home Approved Yes - as an OEM installation in a manufactured (USA) or mobile home

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.

  • 5 stars: 0 (0%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 1 (100%)
  • 1 star: 0 (0%)
T
Tim
Not a good source of heat

Just had one inserted and would recommend a different unit if you want it for heat. I spent seven thousand total on installation and for the unit usually around four thousand. It does heat but only would go five degrees higher than my furnace was set at.

Dear Tim,

We were sorry to hear that you are dissatisfied with your recent purchase.

While we are not the manufacturer, we stand behind everything we sell and are happy to assist with troubleshooting to ensure your unit is performing optimally. In our decades of experience, we have found that performance issues are often related to on-site conditions or installation variables.

I noticed that your review is listed as 'not verified,' and we currently have no record of a purchase under the name 'Tim', for the product you specified. If you did purchase this unit from THE TORCH GUYS, our offer to help remains. We would appreciate the opportunity to speak with you or your installer to review the details.

There are many variables that can affect performance, such as the placement of the rheostat, the remote control settings, or the furnace location. Often, these issues can be resolved with relatively simple adjustments. Additionally, based on our pricing for this Ruby Series model, the total cost you mentioned seems higher than expected, and we would like to understand the details of your installation.

We want to ensure you are satisfied and would love to discuss this further. Please feel free to reach out to us so we can assist you.