Majestic Trilliant 30" Direct Vent Gas Insert
The Majestic Trilliant 30" Direct Vent Gas Insert turns an existing wood-burning fireplace into a remote-started gas fire, with 7 hand-painted oak logs over glowing embers, Canyon Brown brick interior panels and built-in accent lights. It runs up to 32,700 BTU/hr on natural gas and 32,000 on propane, shows a 27-1/4" x 15-11/16" ceramic glass view, needs a firebox opening of 31-5/8" wide by 21" high by 15" deep, and comes with the IFT-RC400 touchscreen remote and a factory installed fan, from $3,479.
Choose the Trilliant 30" if you want a classic brick-and-log fire in your old fireplace without hauling wood. The remote, the fan, the accent lights and the battery backup come with it, and you pick the rest: natural gas or propane, then a front and a surround to suit your opening. It is certified for bedrooms and bedsitting rooms.
It is not right for you if you want a stripped-down insert that you build up one option at a time. The Trilliant 30" comes fully featured, with Canyon Brown brick interior panels, hand-painted oak logs, accent lights and a factory installed fan as standard.
Specifications
The insert is 31-1/8" wide at the front, 20-3/4" high and 14-1/2" deep. It needs a firebox opening of 31-5/8" wide at the front and 20-1/8" at the rear, 21" high at the front and 19-3/16" at the rear, and 15" deep. All of that assumes 1/4 in. of clearance on all sides; add 4 in. of height if the exhaust collar and the damper do not line up. With the 2 in. deep Medium surround the opening may be 31" wide and 21" high, with a 14" unit opening depth. Mantel legs and wall projections are charted in Figures 3.15 and 3.16 and Tables 1 and 2 on page 18 of the installation manual, and combustible mantels in Figure 3.17 on page 19. It takes a 1/2" gas line and a 110-120 VAC outlet.
How the Trilliant 30" compares to the 25" and 35"
All three sizes share the hand-painted oak logs, the Canyon Brown brick interior, the remote, the fan, the battery backup and the vent system; the 30" and 35" add two accent lights. The 30" runs up to 32,700 BTU/hr on natural gas and 32,000 on propane and needs a 31-5/8" wide by 21" high opening. The 25" runs up to 27,000 and 25,000 and needs 26-5/8" by 17-5/16"; the 35" runs up to 35,000 and 35,000 and needs 36-5/8" by 24-1/4". This 30" is from $3,479, the 25" is from $3,319 and the 35" is from $3,619.
Features
- 7 hand-painted oak logs over glowing embers, against Canyon Brown brick interior panels, lit by two built-in accent lights
- IFT-RC400 touchscreen remote with thermostat mode, and a factory installed fan
- Up to 32,700 BTU/hr on natural gas and 32,000 on propane
- IntelliFire Touch ignition with a USB-C battery backup for power outages
- Five front styles and three surround sizes, plus a 2 in. deep Medium surround, to frame your fireplace opening
- Direct vent on two 3 in. flex liners, so it draws its air from outside and sends exhaust out the chimney
Answers to common questions
What venting does the Trilliant 30" need?
It vents straight up your existing chimney on two 3 in. flex liners to a vertical termination, with a 10 ft minimum and 50 ft maximum vertical run. Terminating horizontally is not allowed, so it is not a through-the-wall insert. The LINK-DV and LINKSQ kits include the liners, the termination cap and the flashing, and LINK-ZC-ADPB adapts them to Class A pipe in a factory-built fireplace. To extend above the chimney, SLP 6-5/8 in. pipe connects with the DV-46DVA-GK adapter, with up to four 45 degree elbows in that section and no 90 degree elbows. It needs its own vent system, not a flue shared with another appliance. Our team builds the vent package for your chimney; the kits are on page 54 of the installation manual.
What’s included, what’s required, and what’s optional?
-
Included in the box: Up to 32,700 BTU/hr on natural gas and 32,000 on propane; IntelliFire Touch electronic ignition; IFT-RC400 touchscreen remote control; Fan, factory installed; Two accent lights, factory installed; Battery backup with a USB-C port (battery pack for 4 AA batteries, batteries not included); 7-piece oak log set; Glowing embers and mystic embers, plus ember rocks; Canyon Brown brick interior panels and a decorative brick base; Ceramic glass; Power cord, manual gas shut-off valve and flexible gas connector.
-
Required to complete the installation, purchased separately: Front - a decorative front with a built-in barrier screen; choose one in the Front selector on this page; Surround - fills the space between the insert and your fireplace opening; choose one in the Surround selector on this page; Venting - a 3 in. flex liner kit with termination cap, run up your existing chimney (see pg 54 in the installation manual); Electrical - a 110-120 VAC outlet for the supplied power cord; Gas Line - a 1/2" gas line to the shut-off valve.
-
Optional: A custom surround, a USB-C relocation kit, a wireless wall switch, a Wi-Fi module and reflective black glass interior panels; the insert operates without any of them.
Will the Trilliant 30" fit my fireplace?
It goes into a masonry wood-burning fireplace or a UL127 listed factory-built one with a non-combustible chimney in good working order. With a standard surround your firebox needs to open 31-5/8" wide at the front and 20-1/8" at the rear, 21" high at the front and 19-3/16" at the rear, and 15" deep. With the 2 in. deep Medium surround it can be 31" wide by 21" high with 14" of depth. Custom surrounds cover other openings. The old damper is locked open or removed, and once converted that fireplace is for the gas insert only. It can also sit in a zero clearance wall extension (section 3.C on pages 16 and 17 of the installation manual). It is certified for bedrooms and bedsitting rooms, and may be installed as an OEM installation in a manufactured or mobile home. Rated input is for 0 to 2,000 ft and is reduced 4% per 1,000 ft above that in the USA.
Do I need both a front and a surround?
Yes. The front carries the barrier that keeps hands off the hot glass, and the surround fills the space between the insert and your fireplace opening, with the front mounting onto it. The surround also carries the reset switch and USB-C battery plug the insert needs to run. They ship in separate boxes, so add both to your order unless you already have them. The Inside Fit front is black only and is for an installation that needs a custom surround smaller than a standard overlap front; Clean Screen, Mission Full View and Tuscan Arch come in black or New Bronze, and Forged Arch in black. Surrounds come Small (40" x 27"), Medium (42" x 30"), Large (44" x 32"), each in black or New Bronze, and a 2 in. deep Medium (42" x 30") comes in black. With an Inside Fit front or an on-site surround, a USB-C relocation kit moves the USB-C port and reset switch under the front.
Can I put a mantel or a TV above it?
Mantel legs and wall projections are charted in Figures 3.15 and 3.16 and Tables 1 and 2 on page 18 of the installation manual, and combustible mantels in Figure 3.17 on page 19. Combustible facings do not extend behind the surround. For a TV, Majestic publishes good faith guidelines in Figure 3.4 on page 9 of the owner's manual, with wall surface temperatures in Figure 2.4 on page 7 of the installation manual. They are not a guarantee against your TV maker's temperature limits, so check those too. You can also send us your mantel depth. We're here to help!
What gas and electrical connections does it need?
A 1/2" gas line to the shut-off valve and flexible connector that come with it, plus a 110-120 VAC outlet. The supplied power cord runs about 10 ft 3 in on the left and 7 ft 6 in on the right, and plugs into an outlet box in a bottom back corner of the old fireplace or routes out onto the hearth to a nearby outlet. Inlet pressure is 5" to 10" w.c. on natural gas and 11" to 13" w.c. on propane. In a power outage the included battery pack, with four AA batteries, runs it for up to 72 hours through the USB-C port, though the remote will not run the fan or the lights on battery.
Does buying from The Torch Guys affect my Majestic warranty?
No. The Torch Guys is an authorized Majestic dealer, and the warranty covers fireplaces bought from one. On a gas insert the firebox and heat exchanger carry 20 years on parts and 3 on labor, burners, logs and metal or fiber refractory 10 years on parts and 1 on labor, electrical components, cement refractory panels and glass liner panels 2 years, and all other parts 1 year. We will help you with any claim.
Pro Portal
Dedicated Support
Best Price
Large Selection
Exclusive Deals
Priority Shipping
