Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by Napoleon Authorized Dealer

Napoleon Ascent Premium 46" Linear Direct Vent Gas Fireplace

SKU BLX46NTE
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
Electronic pilot-on-demand ignition with the ProFlame 2 remote control
eFIRE Bluetooth controller
Six-speed blower
Night Light top lighting
Battery back-up holder (takes 4 AA batteries)
4 mm tempered glass door with premium safety barrier screen
Adjustable finishing trim, non-combustible facing board, nailing tabs and gas flex connector with shut-off valve
🔧 Options
Above the Cart (select from dropdown)
Fuel Type: Natural Gas or Propane
Burning Display: 11 glass bead and glass ember colors, 3 media kits, or No Thanks
Log Set: 4 options, or No Thanks
Below the Cart (select from optional accessories section)
Vertical Venting Package, External Wall Venting Package, Heat Management, Power Vent, Interior Panels, Finishing Trim
⚠️ Required to Complete Installation
Burning Display - glass, beads or media kit.
Venting - 4" / 7" direct vent pipe and a wall or roof termination sized for your run (see pg 14 in the installation manual).
Electrical - a grounded 110 V supply, hard-wired to the fireplace.
Gas Line - a 1/2" gas supply to the fireplace's shut-off valve.
Original price $4,409.00 - Original price $5,442.00
Original price
$4,409.00
$4,409.00 - $5,442.00
Current price $4,409.00

About This Product

Napoleon Ascent Linear Premium 46" Direct Vent Gas Fireplace

The Napoleon Ascent Linear Premium 46" is a linear direct vent gas fireplace that comes ready to run from a remote or your phone: 24,000 BTU/hr on natural gas or propane, a built-in blower, Night Light top lighting, a ProFlame 2 remote and the eFIRE Bluetooth controller are all included — from $4,409 before the burning display and any log set you choose above. It vents through a 4" / 7" pipe off the top, frames into a 47 3/8" wide, 18 9/16" deep opening, and carries Napoleon's President's Lifetime Limited Warranty.

Choose it if you want a long, clean linear flame you can dress your way — Driftwood, Birch, Split Oak or Beach Fire logs, glass beads or embers in eleven colors, or a rock, Shore Fire or Woodland media kit — and control from a remote or your phone. It is approved for bedrooms and bathrooms and certified for mobile homes.

It is not right if you need a heater: Napoleon certifies the Ascent Linear Premium as a decorative appliance, not a source of heat. It also needs a burning display of glass, beads or a media kit (with or without a log set), a 4" / 7" direct vent run and a hard-wired 110 V supply, so it is a framed-in installation rather than a drop-in for an existing fireplace.

Specifications

The framed opening is 47 3/8" wide, 39 3/8" high and 18 9/16" deep; minimum enclosure and ceiling heights are tabulated on pages 45 and 47 of the installation manual. The face is finished in non-combustible material, which may stand out up to 4" from the door, and the included finishing trim adjusts 0.5" to 1" for the thickness of the finish. No hearth extension is needed. Mantel clearances depend on the mantel's depth and are charted on page 53 of the installation manual. The top of a horizontal vent pipe keeps 3" from combustibles (1" after a 38" straight rise), and the fireplace takes a 1/2" gas line and a hard-wired 110 V supply.

How the 46" compares to the other Ascent Linear Premium sizes

All Ascent Linear Premium sizes share the log and glass choices, the built-in blower, eFIRE controller and Night Light, and frame 39 3/8" high and 18 9/16" deep. The 46" is rated 24,000 BTU/hr on natural gas and frames into a 47 3/8" wide opening, from $4,409; the 42" is rated 20,000 BTU/hr and frames 42 1/2" wide, from $4,099; the 56" is rated 28,000 BTU/hr and frames 56 1/2" wide, from $4,729. The 42" and 46" vent on 4" / 7" pipe, the 56" on 5" / 8".

Features

  • Linear, clean-face firebox with a 4 mm tempered glass door and a premium safety barrier screen included
  • Your choice of Driftwood, Birch, Split Oak or Beach Fire logs, glass in eleven colors, or a Mineral Rock, Shore Fire or Woodland media kit
  • ProFlame 2 remote plus the built-in eFIRE Bluetooth controller for on/off, flame height, light, blower and timer from your phone
  • Built-in blower with six speeds and Napoleon's dimmable Night Light top lighting
  • Pilot-on-demand electronic ignition with a battery back-up holder (takes 4 AA batteries) for power failures
  • Optional Universal Heat Management to lower temperatures above the fireplace and reduce mantel clearances

Answers to common questions

What venting does the Ascent Linear Premium 46" need?

It is a direct vent fireplace on a 4" / 7" pipe off the top of the unit, run out through a wall or up through the roof: up to 20 ft horizontally and up to 40 ft vertically. Use one brand of pipe throughout — Napoleon, Metal-Fab, BDM, Simpson Dura-Vent, Selkirk Direct Temp, Olympia Ventis or ICC — and do not mix rigid and flexible pipe. Napoleon's 4" / 7" wall terminals are the GD-222, GD-222R and ST47U, with roof kits for pitched and flat roofs. The vent run and termination are ordered separately and sized to your installation, the outside terminal clearances are listed on page 19 of the installation manual, and it is certified for a power vent kit.

What’s included, what’s required, and what’s optional?
  • Included in the box: Electronic pilot-on-demand ignition with the ProFlame 2 remote control; eFIRE Bluetooth controller; Six-speed blower; Night Light top lighting; Battery back-up holder (takes 4 AA batteries); 4 mm tempered glass door with premium safety barrier screen; Adjustable finishing trim, non-combustible facing board, nailing tabs and gas flex connector with shut-off valve.
  • Required to complete the installation, purchased separately: Burning Display - glass, beads or media kit; Venting - 4" / 7" direct vent pipe and a wall or roof termination sized for your run (see pg 14 in the installation manual); Electrical - a grounded 110 V supply, hard-wired to the fireplace; Gas Line - a 1/2" gas supply to the fireplace's shut-off valve.
  • Optional: Log sets, sold separately - Driftwood, Birch or Split Oak logs with charcoal embers, or the Beach Fire set, to sit on the burning display; A vertical or external wall venting package, heat management (Universal Heat Management, the Hot Air Distribution Kit, the Hot Air Exhaust Kit or a thermostatic sensor control), a power vent adaptor kit, MIRRO-FLAME porcelain or Ledgestone panels and a 5/8" finishing trim — the fireplace operates fully without any of them.
Can I mount a TV above it?

Yes, with planning. Napoleon draws the minimum TV clearances above the Ascent Linear Premium on page 54 of the installation manual for a flush installation with a mantel, a recessed installation with a protrusion and partially recessed installations with a mantel (those only with the UHM/DHM kit installed), and crosses out a flush installation without a mantel; the mantel clearances are on page 53, and Napoleon recommends the optional heat management kit for any TV above the fireplace. Adding the optional Universal Heat Management system moves heat away from the fireplace, lowers the temperature above it and reduces the mantel clearances; it goes in before the fireplace is set in place. Always stay within your TV maker's own temperature limits.

Where can it be installed?

Indoors, including bedrooms, bathrooms and bed-sitting rooms, and it is certified for mobile and manufactured homes where local codes allow (fastened in place). It is rated to 4,500 ft, with the input reduced above that. Keep furniture and other objects at least 48" from the front, and do not run it below freezing.

What gas and electrical connections does it need?

A 1/2" natural gas or propane line to the fireplace's flex connector and shut-off valve, connected and tested before the wall is finished — natural gas at 4.5" to 7" w.c. inlet pressure, propane at 11" to 13" w.c. Electrically it is hard-wired to a grounded 110 V supply, and a 4 AA battery holder keeps the flame working in a power failure. It ships for natural gas and converts to propane with Napoleon's kit W175-10006811.

Does buying online affect my Napoleon warranty?

No. The Torch Guys is an authorized Napoleon dealer, so the President's Lifetime Limited Warranty applies in full, and we file claims with Napoleon for you. The firebox, burner, PHAZER logs and embers and rocks are covered for as long as you own the fireplace — parts free for the first 10 years, then at half of retail; blowers, valves, remotes and other electrical parts and the labour are covered for the first year. Coverage starts on the installation date.

  • Model BLX46NTE (natural gas; propane with conversion kit W175-10006811)
  • Series Napoleon Ascent Linear Premium
  • Fuel Type Natural Gas or Propane (choose above)
  • Venting Type Direct vent, 4 in. / 7 in. top vent
  • Ignition Type Electronic intermittent pilot (IPI) with continuous-pilot mode
  • BTU (Natural Gas) 24,000 BTU/hr max / 17,000 min
  • BTU (Propane) 24,000 BTU/hr max / 17,000 min
  • Framing Width 47-3/8"
  • Framing Height 39-3/8"
  • Framing Depth 18-9/16"
  • Electrical 110 V, hard-wired and grounded
  • Hearth Requirement None required
  • Mobile Home Approved Yes — fastened in place, where local codes allow
  • Max Elevation 4,500 ft (input reduced above)
  • Warranty President's Lifetime Limited Warranty — firebox, burner and logs for life; 1 yr electrical and labour

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.