Napoleon Havelock Elite Direct Vent Gas Stove

The vent pipe and termination are sold separately; the stove comes with its firestop. It vents through 4" exhaust / 7" intake coaxial direct vent pipe from a top exit — out through a wall on Napoleon's GD-222R round wall terminal, up through the roof, or up a masonry chimney on a 3" co-linear liner — up to 20 ft horizontally or 40 ft vertically. Wolf Steel, Metal-Fab, BDM, Simpson DuraVent, Selkirk Direct Temp and ICC pipe is approved; Metal-Fab, DuraVent, Selkirk and ICC pipe connect through their specified starter adaptor. It can also vent into an existing B-vent chimney with Napoleon's B-vent adaptor kit; see section 3.2 on page 34 of the installation manual. We can put the vent package together for your run.

• Included in the box: Black stove body with the square glass door, safety barrier and magnetic door handle; PHAZER split oak log set and MIRRO-FLAME porcelain reflective panels; Split flow burner with Hi/Lo flame adjustment and the 100% SAFE GUARD gas control system; Blower that switches itself on as the stove warms up; Proflame II remote control, electronic ignition and battery backup; Firestop for the vent run; Napoleon President's Limited Lifetime Warranty.
• Required to complete the installation, purchased separately: Base - the pedestal or the feet the stove stands on; one of the two is needed to install it; Venting - 4" exhaust / 7" intake direct vent pipe and a termination for your run (see pg 13 in the installation manual); Gas Line - a gas supply run to the stove's manual shut-off valve by a qualified installer; Power - a grounded electrical outlet near the stove for the power cord; Floor Panel - on carpet, vinyl tile or another combustible floor other than wood, a metal or wood panel under the full width and depth of the stove; Securing Kit - in a manufactured (mobile) home (natural gas only) the stove must be fastened in place with a securing kit.
• Optional: The wall mount control — the stove runs without it.

Whichever door and base you choose, every Havelock Elite ships with its PHAZER split oak log set, MIRRO-FLAME porcelain panels, the safety barrier and magnetic handle, the blower, a Proflame II remote control with battery backup, and the firestop. The square glass door comes on the stove; the arched one is an add-on. You still need the pedestal or feet, the vent pipe and termination, a gas line, a grounded outlet, and a metal or wood floor panel if it goes on carpet or vinyl. The arched glass door and the wall mount control are optional.

The wall and corner clearances are in section 3.1 on page 28 of the installation manual. Keep 20" from the top of the stove to the ceiling and furniture 48" from the front. Wood flooring needs nothing underneath; on carpet, vinyl tile or another combustible floor the stove sits on a metal or wood panel covering its full width and depth.

Yes. Vented direct, it is approved for bedrooms, bathrooms and bed-sitting rooms; set up for B-vent it is approved for bedrooms and bed-sitting rooms. On natural gas it is also approved for a permanently located manufactured (mobile) home fueled with natural gas, where local codes allow; there it must be fastened in place with a securing kit. That approval covers the natural gas model only.

Yes. The stove is built and shipped for natural gas; choosing Propane above adds Napoleon's natural gas to propane conversion kit, which a qualified installer fits. On propane it is rated 39,000 BTU/hr input. Above 2,000 ft it is de-rated with Napoleon's certified high altitude kit.

No. Napoleon's President's Limited Lifetime Warranty covers the original purchaser who buys through an authorized Napoleon dealer and has the stove installed by a licensed, qualified installer; there is nothing to register, so keep your proof of purchase with the model and serial number. It covers the combustion chamber, heat exchanger, burner, logs and embers, ceramic glass (thermal breakage) and porcelain parts for as long as you own the stove, electrical and wearing parts such as the blower and remote for one year, and labour for the first year. The Torch Guys will help you with any claim.