Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Trade Pros Program

Get Exclusive Benefits

Trade Pros Program

Get Exclusive Benefits

Exclusive Pricing

Expedited Delivery

Dedicated Support

Click here to learn more
Hours: Mon-Sat - 8am-10pm EST
by Superior Authorized Dealer

Superior VRL3045 45" Linear Vent Free Gas Fireplace

SKU VRL3045ZEN
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
23,000 BTU/hr high / 18,000 low on natural gas; 21,000 / 17,000 on propane
Electronic Ignition System (SIT Proflame II) with battery backup
Full-function remote control — on/off and six flame levels
5 lb bag of Platinum crushed glass media (45" models use 4 lb of it)
Black painted firebox interior — the standard liner finish
Interior floor lighting
Screen barrier bezel (must be installed), burner glass panel, media tray, non-combustible board, and factory gas connector with shutoff valve
ANSI Z21.11.2 listed (PFS TECO Report F21-664)
20-year limited warranty on body, firebox, and barrier
🔧 Options
Above the Cart (select from dropdown)
Fuel Type: Natural Gas or Propane
Burning Display: 3 media upgrades — Reflective Black or Reflective Blue crushed glass, or river rock — or No Thanks to keep the standard Platinum crushed glass
Interior Panel: Black Reflective Porcelain or No Thanks
Below the Cart (select from optional accessories section)
HeatFlo Convection Air Circulation Kit, Blower Kit, Decorative Surround, Driftwood Log Set
⚠️ Required to Complete Installation
Gas Line - natural gas or propane to match the model, run by a qualified installer; propane systems need a 100 lb minimum supply tank
Electrical - a 120 VAC, 60 Hz supply; the electronic ignition must be connected to main power
Combustion Air - a room that meets the vent-free sizing of 50 cu ft per 1,000 BTU/hr; no vent or chimney is needed
Original price $3,899.00 - Original price $4,516.00
Original price
$3,899.00
$3,899.00 - $4,516.00
Current price $3,899.00

About This Product

Superior VRL3045 45" Linear Vent Free Gas Fireplace

No vent, no chimney, no heat lost up a flue. The Superior VRL3045 is a 45" linear vent-free gas fireplace: 23,000 BTU/hr high / 18,000 low on natural gas, electronic ignition with battery backup, and the Platinum crushed glass media bed and interior floor lighting already in the box. It frames into a 45-7/8" opening with zero clearance to combustibles at the spacers. from $3,899, with a 20-year limited warranty on the body, firebox and barrier.

Choose the VRL3045 if you want a 45" linear flame on a wall with no route for a vent — vent free means the wall stays intact and the room keeps all the heat — and your space meets the vent-free sizing rule of 50 cubic feet of room volume per 1,000 BTU/hr.

It is not right for a bedroom or a bathroom — the manual prohibits vent-free installation in both, everywhere — or as a home's primary heat source, or above 4,500 ft of elevation. For a bedroom-approved fireplace in this same linear format, look at Superior's direct-vent DRL series instead; it vents through the wall or roof and is listed for bedroom installation.

Specifications

Frame a 45-7/8" minimum opening in 2 x 4 or larger construction, adding 1/8" per side. The cabinet is zero clearance — 1/2" to the wrapper and 0" at the spacers, back and sides — with 52" minimum from the unit base to the ceiling and a combustible shelf no lower than 33". Keep furniture and other flammables 36" off the front and 42" off the top; a hearth extension is not required. Listed by PFS TECO to ANSI Z21.11.2 as an unvented room heater, report F21-664, for elevations to 4,500 ft.

How the VRL3045 compares to the VRL3055 — and the VRL6048 Signature

The two VRL3000 Pro sizes share the same platform — electronic ignition with battery backup, floor lighting, Platinum crushed glass and the remote; they differ in width and output. This 45" runs 23,000 BTU/hr high on natural gas at from $3,899, against the 55" VRL3055 at 28,000 BTU/hr high, from $4,399. The 48" VRL6048 Signature (from $5,779) steps up to 35,000 BTU/hr and builds in the variable-speed blower and a porcelain liner as standard.

Features

  • Vent free — no vent run, no chimney, no heat lost up a flue; it installs against an interior or exterior wall
  • 23,000 BTU/hr high / 18,000 low on natural gas, with six flame levels from the full-function remote
  • Battery backup lights it through a power outage — the one heater the manual says may then serve as primary heat
  • Platinum crushed glass media and interior floor lighting ship standard
  • Oxygen Depletion Sensing (ODS) pilot shuts the fireplace off if the room runs short of fresh air
  • Zero-clearance cabinet with a 45-7/8" framed opening and a 33" shelf allowance above

Answers to common questions

Does it really need no vent or chimney at all?

Correct — the VRL3045 is an unvented room heater: it burns clean, vents nothing outside, and loses no heat up a flue. What it does need is room air. The manual sizes the space at 50 cubic feet of volume per 1,000 BTU/hr of gas appliances in it, and an Oxygen Depletion Sensing pilot shuts the fireplace down if fresh air runs short. One honest note from the manual: vent-free heat adds moisture to the air, so an under-ventilated room can grow mildew — if your room is small or tight, tell us the dimensions and we will run the sizing with you.

Will it work if the power goes out?

Yes — every VRL3045 has battery backup built in. With batteries in the remote and in the control-compartment holder, the unit sparks at the pilot and lights with no line power, and the manual notes a power outage is the one time this supplemental heater may serve as your primary heat source. The floor lighting and the optional blower are the exception — they stay off until power returns.

Can it go in a bedroom, or in a manufactured home?

A manufactured home yes, a bedroom no. The manual prohibits installing this vent-free fireplace in a bedroom or bathroom (Massachusetts law repeats the ban and adds its own 527 CMR 30 requirements), and it also rules out RVs, high-traffic spots, and windy or drafty locations. An aftermarket, permanently located manufactured or mobile home is approved where local codes allow, grounded to the chassis. If the fireplace is for a bedroom, Superior's direct-vent DRL linears are the bedroom-listed route.

How big does the room need to be?

Big enough to feed the fire its air — the worksheet is simple: multiply the room's volume (length x width x height, plus any open adjoining rooms) by 20; that is the maximum BTU/hr the space supports. At 23,000 BTU/hr high on natural gas the VRL3045 wants roughly 1,150 cubic feet — about a 12 x 12 room with 8-foot ceilings — before any other gas appliance shares the space. A smaller room is not a dead end: ventilation grills or an opened doorway to the next room count toward the volume.

Can I mount a TV above it?

Only the way the manual draws it — with the optional HeatFlo heat-management kit installed, which ducts the convection heat to a register higher on the wall. With HeatFlo, keep the TV at least 18" above the fireplace opening (flush wall or a recessed pocket no deeper than 3-1/2"), the TV 3" below the HeatFlo vent opening and that opening 6" below the ceiling. The manual publishes no TV dimensions for installations without the kit, and it defers to your TV maker's own temperature limit either way.

What’s included, what’s required, and what’s optional?
  • Included in the box: 23,000 BTU/hr high / 18,000 low on natural gas; 21,000 / 17,000 on propane; Electronic Ignition System (SIT Proflame II) with battery backup; Full-function remote control — on/off and six flame levels; 5 lb bag of Platinum crushed glass media (45" models use 4 lb of it); Black painted firebox interior — the standard liner finish; Interior floor lighting; Screen barrier bezel (must be installed), burner glass panel, media tray, non-combustible board, and factory gas connector with shutoff valve; ANSI Z21.11.2 listed (PFS TECO Report F21-664); 20-year limited warranty on body, firebox, and barrier.
  • Required to complete the installation, purchased separately: Gas Line - natural gas or propane to match the model, run by a qualified installer; propane systems need a 100 lb minimum supply tank; Electrical - a 120 VAC, 60 Hz supply; the electronic ignition must be connected to main power; Combustion Air - a room that meets the vent-free sizing of 50 cu ft per 1,000 BTU/hr; no vent or chimney is needed.
  • Optional: A crushed glass, river rock or driftwood media upgrade over the standard Platinum glass, and a black porcelain liner upgrade over the painted interior; A decorative surround in Black Matte or Stainless, the HeatFlo convection kit, or the single-speed blower (blower and HeatFlo cannot be combined) — the fireplace operates fully without them.
How does the warranty work if something goes wrong?

Superior warrants the VRL3045 — 20 years limited on the body, firebox and barrier, one year on the burner and gas components — and The Torch Guys handles it for you: we register the appliance and, if you ever need to claim, we deal with the manufacturer on your behalf rather than handing you a phone number. Keep your invoice and the model number; we hold the rest on file.

  • Model VRL3045ZEN
  • Brand Superior
  • Series Superior VRL3000 — Linear Pro Series
  • Fuel Type Natural Gas or Propane (by variant)
  • BTU (Natural Gas) 23,000 BTU/hr high / 18,000 low
  • BTU (Propane) 21,000 BTU/hr high / 17,000 low
  • Venting Type Vent free (unvented room heater) — no vent or chimney required
  • Ignition Type Electronic ignition, SIT Proflame II, with full-function remote
  • Framing Width 45-7/8" (minimum opening; add 1/8" per side)
  • Clearance (Top) 0" to top standoffs; 52" minimum unit base to ceiling; combustible shelf 33" minimum
  • Clearance (Sides) 1/2" to wrapper, 0" to spacers
  • Clearance (Back) 1/2" to wrapper, 0" to spacers
  • Electrical 120 VAC, 60 Hz required; AA/AAA batteries back up ignition during an outage
  • Hearth Requirement 0" floor clearance and no hearth extension required — on carpeting, vinyl tile or combustibles other than wood flooring, set the unit on a metal or wood panel its full width and depth
  • Mobile Home Approved Yes — aftermarket permanently located manufactured or mobile home, where not prohibited by local codes

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.