Skip to content
FREE Shipping On Orders Over $399!

Ask An Expert

(410) 324-6322

Ask An Expert

(410) 324-6322

(410) 324-6322

Live Chat

Email Us

Hours:

Mon-Sat - 8am-10pm EST

Sunday - Closed

Hours: Mon-Sat - 8am-10pm EST
by True North Authorized Dealer

True North TN25C Catalytic Wood Stove

SKU 31010016
What's Included?

Here's what ships in the box and what you'll choose above before checkout. Not sure what you need? Call us at (410) 324-6322 and our team will spec the right setup.

✓ Included Standard
Cast-iron door with 5 mm ceramic glass, rope gasket and air wash
Catalytic combustor, installed in the flue collar before the first fire
20 firebricks, two-piece baffle board, four baffle tubes and flame shield
Electronic control board with firebox and flue thermocouples, and the 12 V wall adapter that powers it
Side shields and hold-down brackets
EPA 2020 certification, UL 1482 / ULC S627 listing, and the True North 3-year limited warranty
🔧 Options
Above the Cart (select from dropdown)
Base: Leg Kit or Pedestal Kit
Below the Cart (select from optional accessories section)
4" Outside Air Adapter, Blower Kit
⚠️ Required to Complete Installation
Venting - a 6" UL 103 HT listed chimney or a code-approved masonry chimney with a listed liner, at least 12 ft tall from the top of the stove, and a 6" connector (see pg 13-14 in the installation manual).
Floor Protection - a non-combustible ember protector on a combustible floor, 16" in front of the firebox and 8" past each side of the door opening.
Outside Air - in a mobile home or an alcove, outside combustion air through 4" metal duct, with the 4" outside air adapter on the leg model or a rear-drawing pedestal model.
Electrical - a grounded three-prong outlet within reach of the stove for the supplied 12 V adapter.
Original price $2,125.00 - Original price $2,125.00
Original price
$2,125.00
$2,125.00 - $2,125.00
Current price $2,125.00

▶️ Product Video

About This Product

True North TN25C EPA 2020 Catalytic Wood Stove

1.1 grams per hour of particulate emissions at 76% HHV efficiency. The True North TN25C is an EPA 2020 certified catalytic wood stove that delivers 13,500 to 29,200 BTU/hr in EPA testing and up to 60,000 BTU/hr peak on seasoned cord wood, with a cast-iron door, ceramic glass, an electronic control board, a 6" flue and 18" logs as the ideal length. It comes complete on four legs or on a pedestal, the same size and price either way, from $2,125, with True North's 3-year parts warranty on the firebox, castings and glass.

Choose the TN25C if you want the cleanest, most efficient stove True North builds: the catalytic combustor takes it to 1.1 grams per hour and 76% HHV, where the catalytic-free TN20 is rated 1.6 grams per hour and 73%. Pick legs or the pedestal for the look you want — both are the same size and price. It is approved for mobile homes and alcoves, and the 80 CFM blower kit can be added whenever you want it.

It is not right for you if you want a catalytic-free stove. The TN25C's catalytic combustor is the reason it reaches 1.1 grams per hour of emissions and 76% HHV efficiency, cleaner and more efficient than True North's catalytic-free TN20.

Specifications

With a single-wall connector, keep the stove 10" from a combustible side wall, 8" from the back wall and 9-1/2" from a corner; a listed double-wall connector brings that to 8" at the sides, 5" at the back and 7" in a corner. The ceiling must be at least 7 feet high and 57-3/4" above the top of the stove, with 48" clear in front. Connector-to-wall clearances are on the rating label on page 31 and drawn in Figure 9 on page 14 of the installation manual, and mobile-home clearances are drawn in Figure 15 on page 21. On a combustible floor, lay a non-combustible ember protector 16" in front of the firebox and 8" past each side of the door opening — at least 28-3/4" wide by 41" deep — and under any horizontal connector plus 2" each side. The stove stands 28-3/8" high, 21-5/8" wide and 29-7/8" deep on either base, with a 6" flue collar.

How the TN25C compares to the True North TN20

The TN20 is True North's catalytic-free stove, burning with tube combustion. The TN25C adds a catalytic combustor and an electronic control board — 1.1 grams per hour against the TN20's 1.6, 76% HHV efficiency against 73%, and 13,500 to 29,200 BTU/hr in EPA testing against the TN20's 13,900 to 29,200. Both burn 18" logs and stand on legs or a pedestal. The TN25C starts from $2,125; the TN20 starts from $1,866.

Features

  • EPA 2020 certified catalytic wood stove — 1.1 g/hr particulate emissions and 76% HHV efficiency
  • 13,500 to 29,200 BTU/hr EPA-tested output and up to 60,000 BTU/hr peak on seasoned cord wood, ideal with 18" logs
  • Electronic control board fed by firebox and flue thermocouples, run with a single air control lever
  • Cast-iron door with 5 mm ceramic glass, an air wash and a firebrick-lined firebox under a two-piece baffle
  • Approved for mobile homes and alcoves, on four legs or a pedestal — the same size either way
  • Blower-ready — add the 80 CFM blower kit at any time

Answers to common questions

What chimney does the TN25C need, and does any of it come with the stove?

None of the venting ships with the stove. The TN25C has a 6" flue collar and takes a 6" UL 103 HT listed chimney, or a code-approved masonry chimney with a listed liner, at least 12 feet tall from the top of the stove and 3 feet above the roof. The connector can be 6" black pipe of at least 24 gauge or a listed double-wall pipe; double-wall lets the stove sit closer to the walls and is the only kind allowed in a mobile home. The stove never shares a flue with another appliance, and the connector goes through a combustible wall only with one of the wall pass-through systems drawn on pages 19-20 of the installation manual.

How close can it sit to a wall, and what goes on the floor?

With a single-wall connector keep the stove 10" from a combustible side wall, 8" from the back wall and 9-1/2" from a corner; with a listed double-wall connector it is 8" at the sides, 5" at the back and 7" in a corner. Allow a ceiling at least 7 feet high and 57-3/4" above the top of the stove, and 48" clear in front. On a combustible floor it needs a non-combustible ember protector reaching 16" in front of the firebox and 8" past each side of the door opening, at least 28-3/4" x 41". The connector clearances are on the rating label on page 31 of the installation manual.

What’s included, what’s required, and what’s optional?
  • Included in the box: Cast-iron door with 5 mm ceramic glass, rope gasket and air wash; Catalytic combustor, installed in the flue collar before the first fire; 20 firebricks, two-piece baffle board, four baffle tubes and flame shield; Electronic control board with firebox and flue thermocouples, and the 12 V wall adapter that powers it; Side shields and hold-down brackets; EPA 2020 certification, UL 1482 / ULC S627 listing, and the True North 3-year limited warranty.
  • Required to complete the installation, purchased separately: Venting - a 6" UL 103 HT listed chimney or a code-approved masonry chimney with a listed liner, at least 12 ft tall from the top of the stove, and a 6" connector (see pg 13-14 in the installation manual); Floor Protection - a non-combustible ember protector on a combustible floor, 16" in front of the firebox and 8" past each side of the door opening; not needed on a non-combustible floor; Outside Air - in a mobile home or an alcove, outside combustion air through 4" metal duct, with the 4" outside air adapter on the leg model or a rear-drawing pedestal model; Electrical - a grounded three-prong outlet within reach of the stove for the supplied 12 V adapter.
  • Optional: The 80 CFM blower kit and the 4" outside air adapter for a house install — the stove burns and heats without either.
Does the TN25C need electricity?

Yes. Its control board runs on the 12 V wall adapter that comes with the stove, which plugs into a properly grounded three-prong outlet, with the cord kept out from under the stove. If the adapter is unplugged or the power flickers, wait at least 10 seconds before plugging it back in to reset the board. The optional 80 CFM blower kit has its own 115-120 V three-prong cord.

Can it go in a mobile or manufactured home?

Yes, on legs or the pedestal. It needs a listed 6" double-wall connector and UL 103 HT chimney, an outside combustion air supply, and the stove bolted to the floor with lag screws (the leg model through the supplied brackets on its rear legs). It may not go in a sleeping room, the connector may not run horizontally, the structure of the home's floor, walls and roof must be kept intact, and the optional blower must be grounded to the home. Mobile-home clearances are drawn in Figure 15 on page 21 of the installation manual.

What upkeep does the catalytic combustor need?

Look at the combustor at least three times a heating season and, when the stove is cold, clear ash off its face with a soft brush or a vacuum. It lifts out once the baffle board and tubes come down. Burn only dry, seasoned cord wood with the door closed, and have the chimney inspected at least every two months during the season and cleaned at least twice a year.

Does buying online affect my True North warranty?

No. The warranty is True North's and covers both the leg and pedestal models; a claim needs your dated bill of sale, so keep it, and register the stove at truenorthstoves.com/register with the serial number from the certification label. The Torch Guys will help you with any claim. Coverage is 3 years parts (1 year labour) on the firebox, castings and glass (thermal breakage), 1 year parts and labour on the electrical components and switches, and 1 year parts on the gaskets, paint, bricks, baffle tubes and manifold and ceramic fibre board. It covers the original purchaser only and requires installation by an authorized qualified technician.

  • Model TN25C (31010016 leg model / 31010017 pedestal model)
  • Brand True North
  • Series True North TN25C
  • Fuel Type Wood
  • Venting Type 6" UL 103 HT listed chimney or a code-approved masonry chimney with a listed liner
  • Flue Size 6"
  • Maximum Output 60,000 BTU/hr peak on cord wood (13,500 to 29,200 BTU/hr EPA tested)
  • Efficiency 76% HHV (75% LHV)
  • Unit Width 21-5/8"
  • Unit Height 28-3/8"
  • Unit Depth 29-7/8" (25" body)
  • Clearance (Back) 8" with a single-wall connector / 5" with double-wall
  • Clearance (Sides) 10" with a single-wall connector / 8" with double-wall
  • Clearance (Top) 57-3/4" from the top of the stove to the ceiling (7 ft minimum ceiling)
  • Hearth Requirement Non-combustible ember protection on a combustible floor — 16" in front of the firebox and 8" past each side of the door opening (USA)

Shipping & Returns

Free curbside freight delivery on every order over $399. Inspect the shipment before signing and note any damage on the delivery receipt — freight damage claims must be reported within 5 business days. Most items can be returned within 30 days of delivery as long as the product hasn't been installed, is in the same condition you received it, and all original packaging is intact. Return shipping and the original outbound freight cost are deducted from the refund, and a manufacturer restocking fee may apply. Custom and made-to-order products are final sale. Cancellations are free any time before shipment (custom orders excepted). Threshold and white-glove delivery upgrades are available — ask our team.

Full shipping policy · Full return policy · Questions? Call (410) 324-6322 — when you call, we answer.

Warranty

In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect.

Due to the technical nature of our products, the manufacturer must perform troubleshooting to process a warranty claim. Your installer will need to troubleshoot the problem on-site while working in tandem with our technical team. If troubleshooting leads to what The Torch Guys deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms and confirm your consent to proceed.

Once the claim is submitted, the manufacturer will review it and either approve or deny it. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If, for any reason, the claim is denied or we need more information, we will notify you as soon as possible.

All warranties are processed as exchanges. You can expect to receive a prepaid return label for the defective part(s), which must be returned within 30 days of receiving the warranty replacement(s).

Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Given the length of time claims can take, we recommend you fire up your unit in late summer/early fall to ensure your existing fireplace is in good working order for the winter season.