The DelRay Square 42" Full Load from Montigo
The Montigo DelRay Square 42" Full Load (DRSQ42NI-2) is built tall rather than wide: a 37¹¹⁄₁₆" × 26⅞" viewing area with the proportions of a real hearth, not a letterbox slot. It produces 32,500 BTU on natural gas at 63.1% efficiency (27,000 BTU on propane) and frames at 45" wide × 51" high × 21" deep. Montigo's firebox design lets combustible wood facing run right down to the glass opening. From $6,519, with a 15-year firebox warranty.
Choose the DelRay Square if you want the room to have a hearth, not a screen. The portrait proportions read the way a fireplace always has — the focal point of a living room, den, or bedroom — and near-zero side clearances let it tuck into framing that would never take a wider unit. TV recess and Cool Wall installations are both supported per the manual, and it can be installed in manufactured homes.
It is not right if you need primary heat for a large space — this is supplemental zone heat, not a furnace. It is not rated above 4,500 feet elevation, requires a full 21" framing depth (deeper than a standard 2×6 wall), and outdoor use is limited to protected, covered locations shielded from direct water.
Specifications
Framing dimensions are 45" wide × 51" high × 21" deep. Required clearances are Sides: ½", Back: 1½", Floor: 0" with a minimum mantel clearance of 10". The viewing area is 37¹¹⁄₁₆" × 26⅞". It runs on natural gas or propane, uses intermittent pilot ignition (IPI), and is rated for elevations from 0 to 4,500 ft.
This is the Full Load configuration: it includes the Proflame 2 IPI system with multi-function remote (flame, fan, and lighting), a remote-operated blower, Invisimesh safety screen, reflective glass liner, halogen downlighting, and battery backup (WiFi module optional).
DelRay Square 42: Basic vs. Full Load
Both configurations share the same firebox, viewing area, and framing. The Full Load (DRSQ42NI-2, $6,519) adds the Proflame 2 system with multi-function remote, remote-operated blower, reflective glass liner, halogen downlighting, and battery backup; the Basic (DRSQ42NI, $5,609) starts with Proflame Basic ignition and the same Invisimesh safety screen, with upgrades available individually. Both tiers share the same burner and output on this size. Rule of thumb: at eye level in a main room, the Full Load's lighting and remote earn the difference; in a secondary room, the Basic looks nearly identical for less.
Answers to common questions
Can I mount a TV above this fireplace?
Yes. Montigo's DelRay Square installation manual includes TV recess installations — a recessed niche with an enclosed back wall — and Cool Wall Kit installations that allow combustible finishes closer to the unit. One important rule from the manual: when the fireplace is paired with a Cool Wall system, the circulating fan must be disabled to avoid elevated wall temperatures that can damage finishes or mounted electronics. Our team will confirm the exact clearances for your layout.
What venting does it need, and is it included?
Venting is not included. The DelRay is a direct-vent fireplace that runs on Montigo's venting system, and the installation manual also approves alternate venting components from DuraVent, ICC, MetalFab, Selkirk, and Flexmaster (a DuraVent adaptor is available for collared components). Co-linear installs into an existing chimney are supported using DuraVent conversion parts. Send us your wall drawing and we'll spec the exact run and parts list before you order.
Does it work during a power outage?
Yes — the Full Load configuration includes battery backup, so the flame can be lit and run during an outage (the blower will not operate).
Can it be installed outdoors?
Only in protected outdoor applications. Per Montigo's manual, the DelRay Square may be installed in outdoor locations provided it is suitably protected from direct water impingement — a covered outdoor room with overhang coverage in front of and beside the fireplace. It is not a sealed outdoor unit; for fully exposed spaces, look at Montigo's Mahana outdoor line.
Is it approved for mobile or manufactured homes?
Yes — it may be installed in an aftermarket, permanently located manufactured home (USA only) or mobile home, where not prohibited by local codes.
What's included vs. sold separately?
This Full Load configuration includes the Proflame 2 IPI system with multi-function remote (flame, fan, and lighting), a remote-operated blower, Invisimesh safety screen, reflective glass liner, halogen downlighting, and battery backup (WiFi module optional). Venting, termination, and trim kits are sold separately on every model.
Does buying online affect my warranty?
No — your warranty is fully valid. The Torch Guys is 1 of only 3 authorized Montigo e-commerce dealers in the United States, so Montigo's 15-year firebox warranty applies exactly as it would from a local showroom, and we file claims on your behalf.
