The DelRay Square 46" Basic from Montigo
The Montigo DelRay Square 46" Basic (DRSQ46NI) is built tall rather than wide: a 41¹¹⁄₁₆" × 30⅞" viewing area with the proportions of a real hearth, not a letterbox slot. It produces 40,000 BTU on natural gas at 64.1% efficiency (34,000 BTU on propane) and frames at 49" wide × 55" high × 22" deep. Montigo's firebox design lets combustible wood facing run right down to the glass opening. From $6,149, with a 15-year firebox warranty.
Choose the DelRay Square if you want the room to have a hearth, not a screen. The portrait proportions read the way a fireplace always has — the focal point of a living room, den, or bedroom — and near-zero side clearances let it tuck into framing that would never take a wider unit. TV recess and Cool Wall installations are both supported per the manual, and it can be installed in manufactured homes.
It is not right if you need primary heat for a large space — this is supplemental zone heat, not a furnace. It is not rated above 4,500 feet elevation, requires a full 22" framing depth (deeper than a standard 2×6 wall), and outdoor use is limited to protected, covered locations shielded from direct water.
Specifications
Framing dimensions are 49" wide × 55" high × 22" deep. Required clearances are Sides: ½", Back: 1", Floor: 0" with a minimum mantel clearance of 10". The viewing area is 41¹¹⁄₁₆" × 30⅞". It runs on natural gas or propane, uses intermittent pilot ignition (IPI), and is rated for elevations from 0 to 4,500 ft.
This is the Basic configuration: it comes with Proflame Basic IPI ignition and a standard safety screen, with the circulating fan, reflective glass liner, micro mesh safety screen, and remote available as add-ons.
DelRay Square 46: Basic vs. Full Load
Both configurations share the same firebox, viewing area, and framing. The Full Load (DRSQ46NI-2, $7,139) adds the Proflame 2 system with multi-function remote, remote-operated blower, micro mesh safety screen, reflective glass liner, halogen downlighting, and battery backup; the Basic (DRSQ46NI, $6,149) starts with Proflame Basic ignition and a standard safety screen, with upgrades available individually. Both tiers share the same burner and output on this size. Rule of thumb: at eye level in a main room, the Full Load's lighting and remote earn the difference; in a secondary room, the Basic looks nearly identical for less.
Answers to common questions
Can I mount a TV above this fireplace?
Careful consideration should always be given to mounting heat sensitive objects — like TVs or artwork — above a fireplace.
The Cool Wall Advantage Kit (optional/not included with the fireplace) is specifically designed to divert heat away from heat sensitive objects, creating an area safer for mounting a TV or hanging artwork. Specific examples for TVs and combustible mantels are provided in the installation manual. The manual also requires the circulating fan to be disabled when the fireplace is paired with a Cool Wall system, to avoid elevated wall temperatures.
The Torch Guys cannot guarantee that a TV, artwork or other object will be protected from heat, discoloration, or damage. Installation decisions must be based on applicable manufacturer instructions, site conditions, and the judgement of the installer.
For help locating or understanding the manufacturer’s published requirements for this fireplace, please call us at (410) 324-6322.
What venting does it need, and is it included?
Venting is not included. The DelRay is a direct-vent fireplace that runs on Montigo's venting system, and the installation manual also approves alternate venting components from DuraVent, ICC, MetalFab, Selkirk, and Flexmaster (a DuraVent adaptor is available for collared components). Co-linear installs into an existing chimney are supported using DuraVent conversion parts. Send us your wall drawing and we'll spec the exact run and parts list before you order.
Does it work during a power outage?
The ignition is electronic (IPI), so out of the box the Basic model needs power; a battery backup option is available — ask our team to add it if outage operation matters to you.
Can it be installed outdoors?
Only in protected outdoor applications. Per Montigo's manual, the DelRay Square may be installed in outdoor locations provided it is suitably protected from direct water impingement — a covered outdoor room with overhang coverage in front of and beside the fireplace. It is not a sealed outdoor unit; for fully exposed spaces, look at Montigo's Mahana outdoor line.
Is it approved for mobile or manufactured homes?
Yes — it may be installed in an aftermarket, permanently located manufactured home (USA only) or mobile home, where not prohibited by local codes.
What’s included, what’s required, and what’s optional?
-
Included in the box: the firebox, Proflame Basic IPI ignition, a standard safety screen, and Montigo’s 15-year firebox warranty.
-
Required to complete the installation, purchased separately: the Burning Display (your choice of logset or contemporary scene), and a direct-vent run and termination — Montigo pipe, or a manual-approved alternate from DuraVent, ICC, MetalFab, Selkirk, or Flexmaster.
-
Optional: the Interior Panel (brick, ledgestone, or black reflective glass), a circulating fan, the micro mesh safety screen, a handheld remote, the Cool Wall Advantage Kit, and adjustable trim kits.
Does buying online affect my warranty?
No — your warranty is fully valid. The Torch Guys is 1 of only 3 authorized Montigo e-commerce dealers in the United States, so Montigo's 15-year firebox warranty applies exactly as it would from a local showroom, and we file claims on your behalf.
