Kingsman ZCV34 34" Zero Clearance Clean View Direct Vent Gas Fireplace | Ceramic Glass
GLASS TYPE: Tempered Glass | Ceramic Glass
ADD YOUR MEDIA HERE: ZCV34" MEDIA BUILDER
GLASS TYPE: Tempered Glass | Ceramic Glass
ADD YOUR MEDIA HERE: ZCV34" MEDIA BUILDER
The Kingsman ZCV34 with Ceramic Glass has a glass viewing area of 28 5/8" W x 25 3/8" H, and a max BTU input of 19,000.
The ZCV Series is the ultimate in Zero Clearance Direct Vent Fireplaces for new home construction or renovation, and your best choice for installation anywhere throughout your home.
With it's expansive glass viewing area and clever designer options it's no wonder the ZCV from Kingsman is one of the most popular direct vent fireplaces on the market.
Shop all ZCV34 models:
Fan Kit - heat activated with variable speed control
Picture Frame Surrounds
Hearth Mount Surround - 3" Wide (Covers 34 7/8" W x 30 3/4" H)
Liners - Standard Matte Black, Traditional Brick, Herringbone Brick, Porcelain Reflective
Media Options - Contemporary Rocks (2 options), Driftwood Set (2 options), Decorative Stones, Decorative Ember Glass (Glacier Ice, Cobalt Blue, Black, Bronze, White), Ember Chunks or Multi-Colored Cannonballs
Log Sets - Choose from a selection of Oak, Birch, or Driftwood Log Sets
Remote Control - Thermostat On/Off, thermostat on/off modulating, thermostat on/off modulating and fan control
Thermostat - Wall mount millivolt thermostat or programmable thermostat
Wall Mount Battery Holder (WMBH) - The battery holder provides power to the IPI system in case of power failures. Locating the battery holder outside of the fireplace (wall mount), provides a convenient and accessible location for battery installation and removal.
Vented Chase - for cool touch walls and reduced mantel clearances.
Mounting a TV or artwork above your fireplace? No problem. With the ZCV Fireplace the chase of the appliance may be vented to achieve cool touch walls or reduced mantel clearances!
Benefits to Cool Way Technology:
NOTE: Ventilation Plates are removed from fireplace before it is installed into a Vented Chase. Consult manual for further information.
Minimum enclosure height for a vented chase is measured from bottom of fireplace, ventilation of minimum free air opening is required. Choose between our Enclosure Grills (Front or Sides) for adequate ventilation opening as stated in the manual. Grill or opening must meet minimum (as specified in the installation manual) of chase top/ceiling.
Minimum Enclosure Heights
FUEL: Natural Gas, Propane
FLUE: Top
IGNITION: Millivolt/ProFlame II (Electronic)
BTU (MAX): 19,000 (NG), 18,000 (LP)
BTU (MIN): 13,500 (NG), 14,000 (LP)
EFFICIENCY: 53.49% / 56.14% (NG), 58.67% / 61.17% (LP)
VENTING: 4/7" Flex or 4/6 5/8" Hard Pipe
GLASS VIEWING AREA: 28 5/8" W x 25 3/8" H
GLASS TYPE: Ceramic
CERTIFICATION: Heater
ACTUAL WIDTH: 33"
ACTUAL HEIGHT: 36"
ACTUAL DEPTH: 18 1/16"
POWER VENT: Yes
INSTALLATION MANUAL: ZCV34 | Ceramic Glass
BROCHURES:
ACCESSORY MANUALS:
Our base "Curb-side Pickup" shipping is always completely free!
If you are interested in enhanced shipping services such as threshold shipping or white glove delivery, our team is here to assist. Please keep in mind, enhanced shipping services are subject to availability and costs paid by the customer.
To inquire about enhanced shipping services, contact our team via live chat, email: support@thetorchguys.com or call us (202) 539-6797.
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. In the rare case that your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for shipment within the expected shipment window, we will process the charges and submit the order for shipment.
Shipping window varies from product to product. Please review the product page for the expected shipping time of your product. We update these daily so you know what to expect.
In general, items that are custom made, made-to-order, or special order will take longer to ship.
All orders are processed Monday through Friday. We strive to ship your items as fast as possible, so your order may ship sooner than estimated, and you may receive multiple deliveries depending on your order.
Tracking will be sent to the provided email address. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at support@thetorchguys.com
No Shipping outside the USA.
Items that are too large or delicate to ship by standard ground carrier are required to ship freight. Freight carriers are specially trained to handle oversized and fragile items.
Here is what to expect from the freight shipping process:
It’s important to us that you are happy with your purchase. If, for whatever reason, a product doesn’t fit your needs, our team is here to assist.
You may cancel your order any time before it ships free of charge (exceptions do apply for custom orders & made-to-order products).
To cancel an order, please contact us via live chat, email: support@thetorchguys.com or call us (202) 539-6797.
Custom Orders and Made-to-Order Products
We take pride in your ability to customize & personalize our products. Our goal is for you to find the exact product to suit your needs. Given that custom orders & made-to-order products are put into production specifically for your order, these items are not eligible for cancellation or refund.
All sales are final for custom made & made-to-order products.
Items Eligible for Return
Most unused items can be returned within 30 days of delivery. To schedule a return please follow the steps below:
Items Not Eligible for Return
If you would like to exchange your product, you may do so. You are responsible for any shipping fees throughout the returns & exchange process. To schedule an exchange please contact us via live chat, email: support@thetorchguys.com or call us (202) 539-6797.
We aim to ensure your product is delivered in excellent condition. In the rare event that your order does sustain damage during shipping, we are here to assist you. Our team will assume responsibility for any items damaged while shipping as long as you follow the steps and timeline outlined below:
For Freight/Signature Required Deliveries:
For Standard Shipments:
In the unlikely event your product experiences a defect, our technical team will guide you through the manufacturer’s warranty process. Here is a general outline of what to expect:
Due to the technical nature of our products, troubleshooting is required by the manufacturer to process a warranty claim. Your installer will need to troubleshoot and diagnose the problem on-site while working in tandem with our technical team. If troubleshooting leads to what Woodland Direct deems as a defective part, we will submit a warranty claim to the manufacturer on your behalf. Before we submit the claim, we will ask you to review the terms to proceed.
Once the claim is submitted, the manufacturer will review and approve or deny the claim. If they have all the information and accept the claim, your warranty replacement part(s) will begin processing for shipment. If for any reason, the claim is denied, or we need more information, we will notify you as soon as possible.
All warranties are processed as exchanges. You can expect to receive a pre-paid return label for the defective part(s), which will need to be returned within 30 days of receiving the warranty replacement(s).
Warranty claims can take anywhere from 1-4 weeks to process, depending on the season. Due to the length of time claims can extend, we recommend that you fire up your unit in the late summer/early fall to ensure it’s in good working condition for the winter season.
FULL KINGSMAN WARRANTY
This Limited Lifetime Warranty applies only while the unit remains at the site of the original installation and only if the unit is installed inside the continental United States, Alaska, Hawaii, and Canada. The warranty applies only if the unit is installed and operated in accordance with the printed instructions and in compliance with applicable installation and building codes and good trade practices.
Basic One Year Warranty
During the first year after installation, we will provide a replacement for any component part of your unit found to be defective in materials or workmanship, including labour costs. Repair work requires prior approval by Kingsman, labour costs are based on a predetermined rate schedule and any repair work must be done through an authorized Kingsman dealer. (Excluded Components: Accent Light Bulbs, Gasketing and Paint).
Limited Lifetime Warranty
The heat exchanger, combustion chamber and burner of every Kingsman product excluding the Outdoor Firepit are warranted against materials or workmanship during the period the product is owned by the original owner. The part to be replaced must be returned to our distributor in exchange for the replacement part. Any labor, material, freight and/or handling charges associated with any repair or replacement pursuant to this Limited Lifetime Warranty will not be covered by this warranty.
General Terms
In lieu of providing a replacement part, we may, at our option, provide the distributor’s component purchase price from us or a credit equal to the distributor’s component purchase price from us toward the purchase of any new unit which we distribute. If a credit is given in lieu of a replacement part, the rating plate from the unit being replaced must be submitted on a warranty claim, and the unit being replaced must be made available to our distributor for disposition.
In establishing the date of installation for any purpose, including determination of the starting date for the term of this Limited Lifetime Warranty, reasonable proof of the original installation date must be presented*, otherwise the effective date will be based upon the date of manufacture plus thirty (30) days.
We will not be responsible for and you, the user, will pay for: (a) damages caused by accident, abuse, negligence, misuse, riot, fire, flood, or Acts of God (b) damages caused by operating the unit where there is a corrosive atmosphere containing chlorine, fluorine, or any other damaging chemicals (other than in a normal residential environment) (c) damages caused by any unauthorized alteration or repair of the unit affecting its stability or performance (d) damages caused by improper matching or application of the unit or the unit’s components (e) damages caused by failing to provide proper maintenance and service to the unit (f) any expenses incurred for erecting, disconnecting or dismantling the unit (g) parts or supplies used in connection with service or maintenance (h) damage repairs, inoperation or inefficiency resulting from faulty installation or application (i) electricity or fuel costs or any increase in electricity or fuel cost whatsoever including additional or unusual use of supplemental electric heat.
We shall not be liable for any incidental, consequential, or special damages or expenses in connection with any use or failure of this unit. We have not made and do not make any representation or warranty of fitness for a particular use or purpose, and there is no implied condition of fitness for a particular use or purpose. We make no express warranties except as stated in this Limited Lifetime Warranty. No one is authorized to change this Limited Lifetime Warranty or to create for us any other obligation or liability in connections with this unit. Any implied warranties shall last for one year after the original installation. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty or condition lasts, so the above limitations or exclusions may not apply to you. The provisions of this limited warranty are in additions to and not a modification of or subtraction from any statutory warranties and other rights and remedies provided by law.