Napoleon Tall Vector with Luminous Logs 62" See Through Direct Vent Linear Gas Fireplace

• Included in the box: Black premium safety barrier screen in front of the ceramic glass; MIRRO-FLAME porcelain reflective end and rear panels; Adjustable finishing trim (finishing flange) around the opening; ProFlame II remote control and eFIRE phone-app controller; Modulating LED ember bed and dimmable top accent lights; Electronic pilot-on-demand ignition with a 4 AA battery-backup wall switch; Stainless steel gas flex connector with shut-off valve, wall firestop, nailing tabs, vent restrictor and media tray.
• Required to complete the installation, purchased separately: Log Set - a Luminous Driftwood, Oak or Birch log kit with its woodland media; the flames rise from the logs, and the fireplace ships without them; Venting - 5" / 8" direct vent pipe and a wall or roof termination sized for your run; rigid pipe or a power vent on propane (see pg 14 in the installation manual); ⚠ Propane installs require rigid vent pipe (if opting for flex pipe, a power vent is required); Enclosure - a framed enclosure at least 91" tall, its inside walls finished like an outside wall (see pg 27 in the installation manual); Non-Combustible Facing - brick, tile, stone or non-combustible board 15-5/8" above and 7" either side of the opening (see pg 53 in the installation manual); framing requirements differ with a heat management system; Electrical - a grounded 110 V supply, hard-wired to the fireplace; Gas Line - a 1/2" gas supply to the fireplace's shut-off valve.
• Optional: A vertical or external wall venting package, heat management (Dynamic Heat Control, Dynamic Heat Control Plus, Ducted Heat Management or the Hot Air Distribution Kit), a power vent adaptor kit, a 5/8" finishing trim, a Dynamic Linear Trim for the air outlet and the Wall Mount Control - the fireplace operates fully without any of them.

It is a direct vent fireplace on a 5" / 8" pipe off the top of the unit, run out through a wall or up through the roof, up to 40 ft vertically. Use one brand throughout - Napoleon, Metal-Fab, BDM, Simpson Dura-Vent or Selkirk Direct Temp - and do not mix rigid and flexible pipe. On propane use rigid vent pipe; flexible pipe on propane needs a power vent. Napoleon's 5" / 8" wall terminals are the GD422R-2 round terminal and the ST58U-1 Silhouette, with roof kits for pitched and flat roofs. The allowed rises, horizontal runs and elbows are graphed on pages 19 to 26 of the installation manual, and longer runs use Napoleon's PVALX5 power vent adaptor. The vent run is ordered separately and sized to your installation.

Plan on Napoleon's optional Dynamic Heat Control if you want one (DHCL2, two kits for the see-through). It is a heat management system that moves heat away from the fireplace opening and makes room for a TV, sound bar or artwork above, and it goes in with the fireplace - it is not practical to add once the wall is finished. Without it, the wall above the fireplace gets hot and is not suited to a TV; a mantel between them reduces the heat; for TV positions above a mantel, see page 57 of the installation manual. Either way, stay within your TV maker's own temperature limits.

Indoors, including bedrooms, bathrooms and bed-sitting rooms, and it is certified for mobile and manufactured homes where local codes allow (secured in place). It is rated to 4,500 ft, with the input reduced above that. Keep furniture and other objects at least 48" from the front, and do not run it below freezing.

A 1/2" natural gas or propane line to the fireplace's flex connector and shut-off valve, connected and tested before the wall is finished - natural gas at 4.5" to 7" w.c. inlet pressure, propane at 11" to 13" w.c. It is hard-wired to a grounded 110 V supply. It ships for natural gas and converts to propane with Napoleon's kit W175-0864, fitted by a qualified installer.

Yes, for the fire itself: with 4 AA batteries in the wall switch, the pilot and burner still turn on and off. The ember bed and top lights do not run without power, and a fireplace installed with a gas power vent waits for the power to come back.

No. The Torch Guys is an authorized Napoleon dealer, so the President's Lifetime Limited Warranty applies in full, and we file claims with Napoleon for you. The combustion chamber, burner, logs, embers, rocks, ceramic glass and porcelain parts are covered for as long as you own the fireplace - parts free for the first 10 years, then at half of retail; valves, remotes and other electrical parts and the labour are covered for the first year. Coverage starts on the installation date.